Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Basic Orange 
PLA Basic Faux Wood 
PLA Basic Pink 
PLA Basic Brown 
PLA Basic Cherry Blossom Pink 
PLA Basic Sky Blue Brand: Yiqiu3D · Model: Wood PLA 1.75mm 1kg · Wood-look prints usually disappoint: the tone comes out pale, layer lines glare under light and sanding roughens the surface instead of smoothing it. This grade pairs a warm faux wood color with a PLA base that sands and finishes predictably, so props, boxes and decor pieces keep their shape and take a wax or stain after light sanding. It is a PLA filament with a wood-look tone - not a wood-filled material.
It is a PLA filament. The wood reference describes the color and the surface character: a warm faux wood tone on a PLA base that sands and finishes like a matte PLA. It is not a wood-filled or wood-based material, so it prints with standard PLA behavior and does not require a hardened nozzle. If you need a wood-filled grade for a specific project, tell us and we will say clearly whether we can supply it.
Full answers belowBest for: Suits crafts and cosplay parts where a warm wood texture and post-sanding finish are part of the value - available in 9 colours; 1kg spools; lead colour PLA Basic White. Not ideal for: Avoid for outdoor or wet environments - moisture affects the finish; choose ASA instead - available in 9 colours; 1kg spools; lead colour PLA Basic White.
Nozzle 220°C
Nine stocked colors under the PLA Basic line, led by PLA Basic White and including PLA Basic Faux Wood: PLA Basic White, PLA Basic Orange, PLA Basic Jungle Green, PLA Basic Faux Wood, PLA Basic Pink, PLA Basic Brown, PLA Basic Purple, PLA Basic Cherry Blossom Pink and PLA Basic Sky Blue. Faux Wood gives the warm, low-gloss tone that craft and cosplay buyers ask for most.
Published specs: 1.75 mm diameter, 1 kg net filament weight per spool, round spool. We confirm the nozzle window against your printer profile rather than publishing a single figure for this wood-look tone - adjust in small steps and check surface finish and layer bonding on a test piece before a full print.
Fits standard 1.75 mm FDM printers, 1 kg spool holders and multi-spool feeders that accept third-party 1 kg spools, including Bambu Lab and Creality style machines. Every spool is vacuum-sealed with a desiccant pack
open it only when you are ready to print and reseal afterwards. For a smoother wood look, print at a slightly thicker layer and sand lightly before finishing.
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | PLA |
Wood Texture PLA Filament 1.75mm 1kg Yiqiu3D Faux Wood prints best at 220°C nozzle.
| Nozzle Temp | 220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 6.5 cm |
| Pack Format | Pcs |
| Spool Type | Round Spool |
Fits standard 1.75 mm FDM printers, 1 kg spool holders and multi-spool feeders that accept third-party 1 kg spools, including Bambu Lab and Creality style machines. Every spool is vacuum-sealed with a desiccant pack
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | wood-texture-pla-faux-wood-crafts |
| Material | PLA |
| Applicable Raw Material | PLA |
| Product Weight | Net Weight 1kg |
| Main Downstream Platforms | Other |
| Smart | Non-Smart |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
