PLA Black PLA Black
PLA Transparent PLA Transparent
PLA Coffee Brown PLA Coffee Brown
PLA Red PLA Red
PLA Pink PLA Pink
PLA Peach Red PLA Peach Red

Wholesale PLA

Brand: Yiqiu3D · One spool never seems to cover a colorful project — this 1kg PLA value bundle with 8 coordinated colors (Black, Gray, Transparent, Coffee Brown, Red, Rose Red, Pink, Peach Pink) lets you finish complete multi-color jobs without reordering.

  • Colors that look great on screen but bland in plastic are a constant letdown
  • Tangled spools and diameter wobble cause failed prints and wasted filament
  • Time spent tuning filament is time not printing
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

Why is PLA the go-to material for most 3D printing?

PLA balances ease of printing with good strength for non-functional parts. It flows at low temperature, so it is tolerant of settings, sticks well to most beds, and needs no enclosure — which is why it dominates hobbyist and education printing.

Full answers below

Is it right for my project?

Best for: Ideal for models, prototypes and indoor decor where crisp detail and the lowest cost per part matter most - available in 9 colours; 1kg spools; lead colour PLA White. Not ideal for: Not for hot-car interiors or load-bearing parts; use PETG or ABS where heat and impact resistance matter - available in 9 colours; 1kg spools; lead colour PLA White.

Print settings

Nozzle 190-220°C

01 · Why this one

Product highlights

3 reasons

Colors that look great on screen but bland in plastic are a constant letdown

our PLA uses high-pigment masterbatch so Red, Rose Red and Peach Pink come out vivid and true to the swatch.

Tangled spools and diameter wobble cause failed prints and wasted filament

each roll is wound on a precision spool with strict diameter control and laser-measured tolerance for jam-free feeding.

Time spent tuning filament is time not printing

this PLA prints easily at 220°C on Bambu Lab, Creality, Prusa and other mainstream machines, giving clean first layers with standard settings.

Up Close

Gallery

Product Images

Wholesale PLA — Product Images

Spec Sheet

Wholesale PLA — Spec Sheet

Close-up

Wholesale PLA — Close-up

Scene

Wholesale PLA — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

Wholesale PLA prints best at 190-220°C nozzle.

Nozzle Temp190-220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Lengthapprox. 335m
Spool Size (L×W×H)21 × 21 × 7.6 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.wholesale-pla-3d-printer-filament-8-color-bundle-bambu-lab
Diameter 1.75mm
Length approx. 335m
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why is PLA the go-to material for most 3D printing?
PLA balances ease of printing with good strength for non-functional parts. It flows at low temperature, so it is tolerant of settings, sticks well to most beds, and needs no enclosure — which is why it dominates hobbyist and education printing.
Will this 1.75mm PLA fit my printer?
Yes — 1.75mm is the standard diameter for Bambu Lab, Creality, Prusa, Anycubic and most modern FDM printers. Check your extruder spec; if it accepts 1.75mm filament, this spool is compatible.
What temperature should I use?
Set the nozzle to 220°C as a starting point (200-230°C works), the bed to 50-60°C, and begin at 40-60 mm/s. PLA needs no heated chamber, so it is one of the simplest materials to dial in.
How much can I print from a 1kg spool?
A 1kg spool of 1.75mm PLA is approximately 330 meters. Small prints like keychains or cable clips (10-15g) give roughly 70-90 pieces; medium models around 40-60g give about 20 prints per spool.
Do the 8 colors look the same across spools?
Yes — each color, from Transparent to Coffee Brown, is pigment-matched to a master standard before packing. Spools are sealed with desiccant to prevent moisture dulling, keeping colors consistent batch after batch.
What speeds can I print at?
This PLA prints well from 40-80 mm/s. For quality surfaces stay at 40-60 mm/s; for quick prototypes and infill you can run 80-100 mm/s without serious quality loss.
Is this suitable for finished products or just prototypes?
It excels at prototypes, toys, desk items, organizers and education projects — anything not exposed to heat or heavy load. For parts under stress or in warm environments, use PETG or ABS+ from our range.
How do you protect the filament from moisture?
Every spool arrives vacuum-sealed in a moisture-barrier bag with a desiccant pouch. After opening, reseal or store in a dry box — dry PLA prevents brittle strands and bubbly, rough surfaces.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Wholesale PLA

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→