Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Skin Tone 
PLA Orange 
PLA Red 
PLA Peanut Brown 
PLA Green 
PLA Jungle Green Brand: Yiqiu3D · Model: PLA Filament · Stringing is the defect buyers see first and forgive last. A spool that oozes during travel leaves hair-thin strands between towers, inside holes and across moving parts, and the clean-up takes longer than the print. This Basic PLA Filament No-Stringing grade is built around a clean melt: the strand leaves the nozzle without the drip that causes webbing, so parts come off the plate ready to pack.
Stringing comes from molten polymer continuing to ooze out of the nozzle during travel moves, and it gets worse when the melt is inconsistent or the strand diameter varies. This grade is produced with a stable melt and a diameter held at 1.75mm so the residue left in the nozzle is minimal, which is what removes the webbing between separate parts on the plate.
Full answers belowBest for: Suits hobbyist projects, children's toys and decorative pieces that print cleanly straight off the plate - available in 9 colours; lead colour PLA White. Not ideal for: Not suited to structural brackets; switch to PLA+ or PETG when the part carries load - available in 9 colours; lead colour PLA White.
Nozzle 190-220°C
The lead colour is a clean opaque White with the bright, fully covering surface that display and lighting parts need: no muddy tone, no translucent thinness and no colour drift across the spool. Eight further colours are stocked on the same compound - Skin Tone, Yellow, Orange, Red, Peanut Brown, Lemon Green, Green and Jungle Green - so one profile covers a whole colour range.
Clean printing depends on a steady strand, so the diameter is held at 1.75mm on a round spool and the winding stays even from first layer to last. Net weight is 1 kg net filament per spool. Recommended printing temperature is 190-220 °C. RoHS documentation available upon request.
Run it on standard FDM machines including Bambu Lab and Creality style printers inside the 190-220 °C window. Because the melt behaves predictably, routine jobs - children's toys, decorative pieces, household fixes and first-layer-heavy flat parts - print cleanly straight off the plate, and long unattended runs do not end in a nozzle plugged with degraded material.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Basic PLA Filament 1.75mm, No-Stringing No-Clogging Multi-Color, Vacuum-Sealed prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | basic-pla-no-stringing-no-clogging-multi-color-vacuum-sealed |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
