Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Marble Brown Brand: Yiqiu3D · Model: PLA+ 1.75mm 1kg · Plain black prints show every scratch and every layer line. A marble black surface hides both and still reads as a dark, deliberate material: this PLA plus grade carries a black base with lighter marbling through the strand, so display models, awards, teaching aids and presentation prototypes come off the plate with a finish that looks finished rather than unfinished. No paint step and no post-processing.
PLA plus is a modified PLA blend that prints with a slightly wider temperature window and more flow tolerance, which helps on long prints and on machines with a fast hot end. The marble pigment is compounded into the strand, so the veined effect is part of the material and not a coating that can wear or flake.
Full answers belowBest for: Suited to display models, teaching aids and short-run prototypes needing clean surfaces - available in 2 colours; lead colour PLA Marble Black. Not ideal for: Not for food-contact or high-friction wear parts; choose PETG or a carbon-fibre grade - available in 2 colours; lead colour PLA Marble Black.
Nozzle 200-230°C
Two marbled references are stocked: PLA Marble Black, the lead colour for this listing, and PLA Marble Brown. Both are wound on a standard plastic spool with the colour name printed on the label, so a reorder can be quoted against the same reference instead of a photo.
Recorded parameters: diameter 1.75 mm, round spool profile, net weight 1 kg per roll, recommended nozzle temperature confirmed for your application. The wider window of this PLA plus grade gives room to tune the look: the lower end keeps the black deeper, the upper end brings out a brighter swirl, and layering stays consistent through a long display run.
Prints on standard 1.75 mm FDM machines with a 0.4 mm nozzle and no enclosure, on the same bed surface you already use for PLA. The marbled tone lives in the strand, so parts that will be photographed need no filler or paint - although sanding and acrylic paint still work when a project calls for them.
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | PLA |
Marble Black PLA Plus Filament 1.75mm 1kg Yiqiu3D Marble Swirl prints best at 200-230°C nozzle.
| Nozzle Temp | 200-230°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | marble-black-pla-plus-marble-swirl |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
