PLA Matte Zone PLA Matte Zone
[PLA Matte] Cream White [PLA Matte] Cream White
[PLA Matte] Almond Yellow [PLA Matte] Almond Yellow
[PLA Matte] Cement Gray [PLA Matte] Cement Gray
[PLA Matte Rainbow] Rainbow Gradient Color [PLA Matte Rainbow] Rainbow Gradient Color
PLA Basic Zone Easy to Print PLA Basic Zone Easy to Print

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler

Brand: Yiqiu3D · Model: Matte PLA 1.75mm 8x250g · A single 1 kg spool locks you into one color, and a wrong shade leaves a full roll on the shelf. This matte PLA ships in two formats so the pack matches the job: 1 kg spools for one-color production, and an 8 x 250 g pack set that puts eight shades on the bench before any bulk commitment. Both formats hold 1.75 mm round diameter, print in a 195-225 °C nozzle range and arrive vacuum-sealed with a desiccant pack, so the strand reaches the machine dry.

  • Published parameters: PLA
  • Fits standard 1.75 mm FDM printers and common spool holders
  • the 250 g spools mount directly on most desk-side holders
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Tolerance ±0.03mm
Material PLA
Quick Answer

What is the difference between the 1 kg spool and the 8 x 250 g set?

Both formats carry the same matte PLA, the same 1.75 mm round diameter and the same 195-225 °C nozzle range - only the pack size differs. A 1 kg spool suits one color run at volume; the 8 x 250 g pack set is an eight-color sample format for shade checking, kitting and short runs. Tell us the job and we will quote the format that fits.

Full answers below

Is it right for my project?

Best for: A cost-effective route for parts that do not face extreme service conditions - available in 11 colours; lead colour PLA Basic 8 Pack Set. Not ideal for: Not for high-temperature service; a PC or ASA grade is the better route there - available in 11 colours; lead colour PLA Basic 8 Pack Set.

Print settings

Nozzle 195-225°C · Bed 50-60°C

01 · Why this one

Product highlights

3 reasons

Published parameters: PLA, 1.75 mm diameter, 195-225 °C nozzle range, round spool, matte finish. Diameter and roundness keep extrusion steady: the strand is wound under tension so a long job feeds evenly and the wall stays uniform from first layer to last. We do not publish a heated bed temperature for this grade - start from your printer PLA profile and set the first layer to your surface.

Fits standard 1.75 mm FDM printers and common spool holders, including Bambu Lab and Creality style machines. 1 kg spools run on standard 1 kg holders

the 250 g spools mount directly on most desk-side holders, and if your machine needs a different hub or an adapter, send us the model and we will confirm the fit. Small spools empty fast on a long print, so check the remaining roll before an overnight job and keep the next color sealed until the swap.

Up Close

Gallery

Product Images

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product ImagesMatte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product ImagesMatte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product ImagesMatte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product ImagesMatte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product ImagesMatte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Product Images

Spec Sheet

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Spec Sheet

Close-up

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Close-up

Scene

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler — Scene
Technical Data

Specifications

Diameter 1.75mm
Tolerance ±0.03mm
Material PLA

Print Profile

Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler prints best at 195-225°C nozzle, 50-60°C bed.

Nozzle Temp195-225°C
Bed Temp50-60°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

What You Receive

A single 1 kg spool locks you into one color, and a wrong shade leaves a full roll on the shelf. This matte PLA ships in two formats so the pack matches the job: 1 kg spools for one-color production, and an 8 x 250 g pack set that puts eight shades on the bench before any bulk commitment. Both formats hold 1.75 mm round diameter, print in a 195-225 °C nozzle range and arrive vacuum-sealed with a desiccant pack, so the strand reaches the machine dry.

  • Vacuum-sealed bag
  • Desiccant pack
  • Arrives dry and ready to print

Attributes

Country / Regionchina
HS Code39169050
Item No.matte-pla-pack-8x250g-color-sampler
Diameter 1.75mm
Appearance Round Spool
Diameter 1.75mm
Appearance Round Spool
Scenario Bridge

Perfect for these projects

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →

Jigs & Fixtures That Survive the Production Floor

View solution →
Before You Ask

Frequently Asked Questions

What is the difference between the 1 kg spool and the 8 x 250 g set?
Both formats carry the same matte PLA, the same 1.75 mm round diameter and the same 195-225 °C nozzle range - only the pack size differs. A 1 kg spool suits one color run at volume; the 8 x 250 g pack set is an eight-color sample format for shade checking, kitting and short runs. Tell us the job and we will quote the format that fits.
Will this filament fit my printer?
The 1 kg spools are standard round 1.75 mm and fit common FDM printers and standard 1 kg spool holders, including Bambu Lab and Creality style machines, and the 250 g spools mount directly on most desk-side holders. If your printer uses a proprietary cartridge or a non-standard hub, send us the model name and we will confirm the fit before you order.
What print settings do you recommend?
Nozzle temperature 195-225 °C for this matte grade. We do not publish a heated bed temperature; start from your printer PLA profile and set the first layer to your build surface. Keep part cooling moderate so the matte skin stays even, and print a small sample from a 250 g spool to tune temperature before a full-size part.
How much filament is in the set, and how long is one 250 g spool?
The pack set is eight 250 g spools, so 2 kg of matte PLA in total across eight colors, 250 g per spool. We do not publish a metre figure for the 250 g spools, because usable length varies with the diameter and density of the batch; 1 kg spools of the same matte grade are also available for single-color production runs.
What is this matte PLA best used for?
Display models, product mock-ups, retail props, panels and decorative parts where reflected light and layer lines would show on a glossy surface, plus the 250 g sample format for shops and makers who compare several shades before a bulk order. For parts held in sustained heat in service, choose ABS or ASA instead.
How is it packed, and how should I store the spools?
Every spool - 1 kg or 250 g - is vacuum-sealed with a desiccant pack and boxed for export. Open the bag only when the spool goes on the machine, then reseal it or move it to an airtight container away from sunlight and damp floors. Small spools are opened more often than large ones, so keep the spares sealed.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Matte PLA Filament 8 Pack 1.75mm 8x250g Color Sampler

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

→📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→