Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PETG White Brand: Yiqiu3D · Big parts run out of filament before they finish? Yiqiu3D PETG 5 kg jumbo spools hold five times a standard roll, so production shops and heavy users print large parts continuously with far fewer spool swaps and less per-kilo cost.
It depends on your machine's filament holder — the 5 kg spool is larger and heavier than standard 1 kg rolls. It fits most spool holders and dry-box setups; for printers with tight enclosures, use an external spool holder. Confirm your holder width before ordering.
Full answers belowBest for: For reusable packaging, crates and bins that must survive repeated handling - available in 3 colours; 5kg spools; lead colour PETG Black. Not ideal for: Avoid for very thin flexible walls; TPU or PP may suit that geometry better - available in 3 colours; 5kg spools; lead colour PETG Black.
Nozzle 230-260°C
Two practical shades cover every project: Clean White for professional parts and True Transparent for see-through enclosures and light features — both with the natural clarity PETG is known for.
A 5 kg spool is only worth it if the whole roll is consistent: imported raw material, laser-measured 1.75 mm diameter and a density of 1.29-1.4 g/cm3 keep extrusion uniform from the first meter to the last.
Large-format printing without the drama: 220°C nozzle on Creality, Anycubic or Bambu Lab machines, low warp, strong layer bonding and tidy winding that keeps the big spool feeding smoothly through long jobs.
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Yiqiu3D PETG 5kg Jumbo Spool 1.75mm prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Skip manual setup — import the ready-made profile into OrcaSlicer (Help → Open Configuration Folder → filament):
Manufacturer-recommended baseline — validated on Bambu Lab, Creality, Anycubic, Prusa and ELEGOO fleets. Fine-tune on your machine before production runs.
Spool details for your feeding and handling setup.
| Gross Weight | 6.2 kg |
|---|---|
| Length | approx. 1635m |
| Spool Size (L×W×H) | 31 × 31 × 18.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | petg-jumbo-spool-filament |
| Product Name | 3D Printer Consumables |
| Cross-Section | Round |
| Application | 3D Printer |
| Appearance | Round Spool |
| Density | 1.29~1.4(g/cm3) |
| Payment Terms | Payment in Advance |
| Diameter | 1.75mm |
| Length | approx. 1635m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
