Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Silk Dual Color Blue+ Red002 
Silk two colors gold+blue 
Silk two colors sky blue+purple blue004 
Silk two colors black+purple blue 
Silk two colors bright gold+rose red006 
Silk Dual Color Bright Gold+ Pink007 Brand: Yiqiu3D · Two-tone silk prints normally need glue, paint or two separate spools to get a colour split. This laser metallic silk filament carries two colours in one strand, so a single spool lays down a mirror-like dual-tone surface with the metallic sheen and the colour transition built into the print itself.
No. It is PLA plastic with a co-extruded colour pair and a silk pigment system that produces a glossy, metallic-looking surface. The base material is a printable PLA, so it behaves like PLA on the printer and a standard nozzle is enough; no metal, glass or stone is involved.
Full answers belowBest for: For high-gloss art and craft prints that need a smooth metallic-looking surface off the plate - available in 9 colours. Not ideal for: Not suited to tight-tolerance stressed parts; a carbon-fibre grade holds up better - available in 9 colours.
Nozzle 200-225°C
Metallic-look filament is prone to clogging because the pigment load raises viscosity, and a clog mid-print wastes hours. This grade is extruded with controlled pigment loading and a 1.75mm diameter tolerance, so it feeds steadily at 200-225 C on a standard FDM printer with a 0.4mm nozzle and lays a uniform, glossy bead.
Colour split position is what buyers pay for here, and it drifts when winding tension is uneven. Spools in this series are wound with in-line diameter gauging and run on a fixed 200-225 C window, so the dual-tone seam lands predictably on the same profile and repeat orders print the same way.
Mixed two-colour spools are usually the least consistent item in a filament range, and it shows up as visible shade mismatch inside one product photo. Each run here uses one dye lot, is kept segregated from the next, and is vacuum sealed per spool, so both the parts and the product images stay consistent.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Silk PLA Dual & Tri-Color Filament 1.75mm, Laser Metallic Shine, 8 Color Combos prints best at 200-225°C nozzle.
| Nozzle Temp | 200-225°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | silk-pla-dual-tri-color-laser-metallic |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
