PLA Matte Black PLA Matte Black
PLA Matte Dark Grey PLA Matte Dark Grey
PLA Matte Skin Tone PLA Matte Skin Tone
PLA Matte Light Wood PLA Matte Light Wood
PLA Matte Orange PLA Matte Orange
PLA Matte Green PLA Matte Green

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone

Brand: Yiqiu3D · Layer lines and glossy reflections scream 3D-printed and ruin the look of premium products. This matte PLA absorbs light instead of bouncing it, delivering a soft, non-reflective surface that visually smooths layer lines, so prints look injection-molded and feel like finished products.

  • The 8 matte shades from charcoal deep gray to light wood and skin tone create a natural
  • A matte finish is only impressive if the filament is reliable. Every spool is laser-measured for diameter consistency
  • Matte PLA keeps the beginner-friendly behavior of standard PLA: rated 220°C
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

How does matte PLA hide layer lines so well?

Matte PLA contains a fine particulate additive that scatters light across the surface instead of reflecting it like standard PLA. The result is a soft, satin-like finish in which layer lines and small surface marks become far less visible to the eye. This grade is rated for a 220°C print temperature.

Full answers below

Is it right for my project?

Best for: Suitable for a wide range of prototyping and light-duty end-use parts - available in 9 colours; lead colour PLA Matte White. Not ideal for: Not for heavy structural duty; a reinforced grade will perform better under load - available in 9 colours; lead colour PLA Matte White.

Print settings

Nozzle 195-225°C

01 · Why this one

Product highlights

3 reasons

The 8 matte shades from charcoal deep gray to light wood and skin tone create a natural, fabric-like texture palette, ideal for architectural models, statues, and decor that need a calm, high-end finish rather than plastic shine.

A matte finish is only impressive if the filament is reliable. Every spool is laser-measured for diameter consistency, wound with even tension to prevent tangles, vacuum sealed with desiccant, and batch-matched so the muted tones stay uniform order after order.

Matte PLA keeps the beginner-friendly behavior of standard PLA: rated 220°C, low warp, low odor, and no enclosure needed, running smoothly on Creality, Bambu Lab, Prusa, and Anycubic machines with minimal tuning.

Up Close

Gallery

Product Images

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Product ImagesWholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Product ImagesWholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Product ImagesWholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Product ImagesWholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Product Images

Spec Sheet

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Spec Sheet

Close-up

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Close-up

Scene

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone prints best at 195-225°C nozzle.

Nozzle Temp195-225°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.wholesale-matte-pla-filament
Diameter 1.75mm
Appearance Round Spool
Before You Ask

Frequently Asked Questions

How does matte PLA hide layer lines so well?
Matte PLA contains a fine particulate additive that scatters light across the surface instead of reflecting it like standard PLA. The result is a soft, satin-like finish in which layer lines and small surface marks become far less visible to the eye. This grade is rated for a 220°C print temperature.
Will this matte PLA work with my printer?
Yes. It is standard 1.75mm filament and fits any FDM hotend, including Creality, Bambu Lab, Prusa, Anycubic, and Ender-series machines. Matte PLA behaves like normal PLA, so no enclosure or special hardware is required.
What nozzle and bed temperatures should I use?
Start at the rated nozzle temperature of 220°C and adjust within 200-220°C for your machine, set the bed to 50-60°C, and run the first layer at 20-30 mm/s. Matte compounds prefer slightly lower speeds for an even, dust-free surface.
How long does one spool last?
A full spool typically yields dozens of medium decor or model parts at 10-20% infill, or hundreds of small components. Exact yield depends on part volume, wall count, and infill percentage in your slicer.
How consistent are the matte tones, especially light wood and skin?
All eight matte shades are color-matched during compounding and checked before packing, so charcoal deep gray, light wood, and skin tone stay uniform across spools and repeat orders. The matte texture itself keeps large surfaces even layer by layer.
What print speed range works best?
Print matte PLA at 40-80 mm/s for the smoothest finish; 40-60 mm/s is ideal for statues, models, and decor, while simple geometry can run up to 80 mm/s. Slightly lower outer-wall speed reduces visible banding.
Is matte PLA for decor and models or functional parts too?
Matte PLA is primarily a display material: architectural models, statues, vases, decor, and product mockups benefit most from its light-absorbing surface. Like all PLA, avoid heavy mechanical loads and heat, where PETG or ABS would be better.
How should I store the filament?
Each spool ships vacuum sealed with a desiccant pouch. Store it dry and reseal the bag after opening; if a long-stored spool becomes brittle or strings, dry it at around 50°C for 4 hours before use.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Wholesale Matte PLA Filament 1.75mm Anti-Glare Layer-Line Hiding 8 Colors Light Wood Skin Tone

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

→📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→