Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Wood Brand: Yiqiu3D · Model: Wood PLA · Wood-effect prints are only worth making if they can be finished, and many spools fail exactly there: the surface fuzzes under abrasive paper or softens and smears instead of cutting clean. This Wood PLA Filament Sandable grade is made to be worked after printing. It responds to sanding, takes stain and paint, and holds a warm wood-grain look on the part, so DIY builds and cosplay props get a finished appearance instead of raw plastic.
Ordinary wood-effect PLA is tuned for appearance only, so abrasive paper tends to tear the surface into fuzz or melt it into smears. This grade is formulated so the printed wall cuts cleanly under sandpaper, holds the edge you sanded and accepts stain or paint. That is what allows a printed part to be finished like a workshop piece rather than left as-is.
Full answers belowBest for: Suits crafts and cosplay parts where a warm wood texture and post-sanding finish are part of the value - available in 9 colours; 1kg spools; lead colour Wood PLA. Not ideal for: Avoid for outdoor or wet environments - moisture affects the finish; choose ASA instead - available in 9 colours; 1kg spools; lead colour Wood PLA.
Nozzle 190-220°C
The wood character comes from the strand itself, not from a coating: the surface is matte, warm and grained, with no plastic gloss, which is why flat panels, tabletop scenery and prop armour read as timber and not as filament. The same wood-effect compound is used across the whole stocked colour range, so a single display or scenery set can be built from one material family.
Sandability is only usable if the print is dimensionally steady. The strand is held at 1.75mm diameter on a round spool for reliable feed, net weight is 1 kg net filament per spool, and the carded length is approx. 335m. Recommended printing temperature is, with the setting confirmed for your application. RoHS documentation available upon request.
Run it on standard FDM printers such as Bambu Lab and Creality style machines inside the 190-220 °C window. The sandable surface is the reason to choose it: model makers, scenery builders and prop makers can sand a joint, fill a seam and paint over it, and the texture keeps reading as wood after the work is done. A slightly wider nozzle and normal PLA part cooling are all it needs.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Wood PLA Filament 1.75mm 1kg Sandable Wood Finish prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | wood-pla-sandable-wood-finish-craft |
| Material | PLA |
| Raw Material | PLA |
| Print Size | 1.75mm |
| Net Weight | 1KG Net |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
