Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
White 
Transparent Black 
Wood Color 
Skin Tone 
Red 
Transparent Red Brand: Yiqiu3D · Wood-style models that read as plain plastic on the shelf? This strand is pigmented through to a warm wood tone, so the surface itself carries the timber look instead of sitting under a glossy plastic sheen. Prints take light sanding and rub-on stain, so a model can be finished toward a wood surface after printing. The colour is in the material, not a coat that wears off the edges on a handled prop.
It is PLA pigmented through to a warm wood colour with a matte, low-gloss surface, so it prints on standard PLA profiles and behaves like ordinary PLA on the machine. The wood look comes from the pigment and the surface finish, not from a timber filler, and the printed part can be sanded and stained after printing. It is not a transparent material, so light is not meant to pass through the wall.
Full answers belowBest for: Suits crafts and cosplay parts where a warm wood texture and post-sanding finish are part of the value - available in 9 colours; 1kg spools; lead colour Transparent Color. Not ideal for: Avoid for outdoor or wet environments - moisture affects the finish; choose ASA instead - available in 9 colours; 1kg spools; lead colour Transparent Color.
Nozzle 220°C
Nine stocked colours share the same matte, low-gloss surface, so one supply line covers a whole prop or decor range. Warm neutrals lead: Wood Color, Cream Yellow, Skin Tone, White and Black, with Red for accents. Natural tones hide layer lines better than high-gloss surfaces, so a wood-tone model photographed straight off the plate still reads as timber. Colour chips ship with the spool for approval before a run.
Repeat batches stay on profile: 1.75 mm round strand on a round spool, approx. 335 m per 1 kg net filament per spool, spool measuring 21 x 21 x 7 cm, wound in one continuous even pattern so the feed stays steady at detail-layer heights. One spool prints a full set of matching parts, which matters when a display or a prop is built from several pieces and the tone has to stay the same across all of them.
Wood-tone finishes dull when the strand has taken on moisture? Keep the spool sealed until use and dry an open spool before a long print. This filament runs at anozzle, needs no heated bed setting, and behaves like standard PLA on a 1.75 mm direct-drive or Bowden path with a 0.4 mm nozzle, so profiles you already trust for PLA keep working.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Wood PLA Filament 1.75mm 1KG Wood Tone Texture Natural Look 8 Colors Sandable prints best at 220°C nozzle.
| Nozzle Temp | 220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.2 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Box |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | wood-pla-wood-tone-texture-natural |
| Material | PLA |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
