Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Silk Dual Color Blue+ Red002 
Silk two colors gold+blue 
Silk two colors sky blue+purple blue004 
Silk two colors black+purple blue 
Silk two colors bright gold+rose red006 
Silk Dual Color Bright Gold+ Pink007 Brand: Yiqiu3D · One spool, two colour bands: dye lots that read flat are the usual complaint on two-tone spools, because the second tone only appears in patches of the print. Here both tones run along the same 1.75 mm strand, so a single-wall vase or a scaled figurine shows the laser blue and the deep violet together in one pass, with no mid-print spool change. 1 kg net filament per spool, approx. 335 m, vacuum-sealed with a desiccant pack.
It is a glossy silk PLA plastic filament: the effect comes from the surface sheen and the two pigment bands, with no metal in the material. Both tones run continuously along a single strand, so they both appear across one printed wall and the balance shifts with the viewing angle. Everything else is ordinary PLA behaviour - nozzle 200-225 °C and your usual PLA cooling setting.
Full answers belowBest for: Where surface finish sells the product: display models, awards and shop-window prototypes - available in 9 colours. Not ideal for: Avoid outdoor or heat-exposed items - the sheen dulls; choose ASA for weather resistance - available in 9 colours.
Nozzle 200-225°C
The angle changes the read: the iridescent cast is a glossy silk PLA plastic finish - a surface effect, not metal content - and it is strongest on curved walls and in spiral-vase mode. Shoot one print from two angles before a launch, because the balance between the bands shifts with the light and that is exactly the frame buyers use in a listing.
Feed quality you can plan a batch around: 1.75 mm round profile, 1 kg net filament per spool wound evenly on a round spool, so a long decorative print runs to the end without a crossed strand or a snag at the halfway point. The 200-225 °C nozzle window sits inside the standard PLA profile your machines already run.
Where it earns its keep: dragon-scale and oriental-motif tiles, figurines, vases, award plaques, cosplay props and shop-window prototypes - plus gift and collector items where the finish is the headline feature. Keep it off load-bearing brackets and hinges, and out of sustained heat or long direct sun, where the sheen dulls.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Toson Silk PLA 1.75mm Laser Blue Two-Tone Chinese Dragon, 8 Silk Dual-Color Combos, Custom Packaging, Bambu Lab prints best at 200-225°C nozzle.
| Nozzle Temp | 200-225°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
One spool, two colour bands: dye lots that read flat are the usual complaint on two-tone spools, because the second tone only appears in patches of the print. Here both tones run along the same 1.75 mm strand, so a single-wall vase or a scaled figurine shows the laser blue and the deep violet together in one pass, with no mid-print spool change. 1 kg net filament per spool, approx. 335 m, vacuum-sealed with a desiccant pack.
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | toson-silk-pla-laser-blue-two-tone |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
