Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
TPU Clear 
TPU Clear Sapphire Blue 
TPU Clear Green 
TPU Clear Red 
TPU Gray 
TPU Skin Brand: Yiqiu3D · Repeated flexing cracks stiff parts at the joint? This elastic rubber-like TPU takes a hard bend and returns to shape, absorbing impacts and vibration instead of passing them on, so bumpers, grips, pads and wheel treads survive drops. Low rebound loss plus good abrasion behaviour suits parts handled daily - 1 kg net filament per spool, 1.75 mm.
It is a flexible TPU emphasising elastic recovery: the printed part bends and returns toward its original shape after repeated cycles, and it damps impacts instead of passing them straight through, which suits grips, bumpers, pads and protective shells. Hardness is not stated on the sheet - confirm your target Shore value before a run.
Full answers belowBest for: Ideal for soft-touch functional parts that need to survive repeated flexing - available in 9 colours; 1kg spools; lead colour TPU Snow White. Not ideal for: Not for high-temperature applications; switch to ABS or PC where heat resistance is required - available in 9 colours; 1kg spools; lead colour TPU Snow White.
Nozzle 220°C
Nine stocked colourways for one assembly: Snow White, Clear, Black, Gem Blue, Clear Green, Clear Red, Clear Orange, Grey and Skin Tone. Black and Grey hide wear marks on bumpers and pads, Snow White and Skin Tone suit grips and wearables, and the translucent shades let you see the part beneath. Colour chips ship with the spool for approval.
Predictable extrusion keeps elastic parts consistent: the nozzle setting confirmed per application, no heated bed required, 1.75 mm diameter with +/-0.02 mm tolerance, laser-checked on the line and wound on a 22 x 22 x 9 cm spool in an even pattern. Steady diameter is what keeps wall strength and rebound the same when you print pads or bumpers in batches.
Soft filament buckles at the drive gear? Print elastically only with a direct-drive or short Bowden extruder and slow print speeds, avoiding long retractions. This TPU melts steadily at 220 °C, so single-wall flexing parts, gaskets and protective shells print without clogging, and the part keeps its elastic behaviour.
| Diameter | 1.75mm |
|---|---|
| Material | TPU |
Yiqiu3D TPU Filament 1.75mm 1kg Flexible Elastic Rubber-Like prints best at 220°C nozzle.
| Nozzle Temp | 220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
Flexible filaments punish loose tolerances, so this TPU is laser-measured at 1.75mm with consistent roundness and carefully tensioned winding, vacuum-sealed with desiccant to keep the soft strand dry and bubble-free.
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | tpu-filament-flexible-elastic |
| Product Name | 3D Printing Consumables TPU |
| Grade | Please Inquire |
| Cross-Section | Round |
| Item No. | TPU |
| For 3D Printer Use | Material |
| TPU | Snow White |
| Round Spool | Length |
Everything we publish for this material, in one place.
