Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA CG White002 
PLA CG Blue004 
PLA CG Yellow005 
PLA CG Green006 
PLA CG Orange011 
PLA TM 010 Transparent Color (Original Color) Brand: Yiqiu3D · Brittle prints are the quiet cost in any PLA order: clips snap on the first assembly, brackets crack at the screw boss, a dropped model shatters and the spool is blamed. This Eco Strong grade is built for impact resistance instead of pure stiffness, so snap-fit housings, jigs and shop-floor fixtures survive the knock that breaks ordinary PLA — on prototyping, model making and light functional parts where toughness matters more than raw rigidity.
A PLA part usually fails by cracking rather than bending, and a standard grade is stiff but easy to shatter. This Eco Strong grade keeps the same 1.75mm PLA base and adds a toughening system, so the printed part absorbs a knock instead of splitting at the first stress point. It is still PLA plastic, not an engineering resin, so it is the right choice for housings, jigs and snap-fit parts rather than for continuous load.
Full answers belowBest for: A low-cost route to jigs and fixtures that see only light duty on the shop floor - available in 9 colours; 1kg spools; lead colour PLA CG Black001. Not ideal for: Not for heavy-duty tooling; a carbon-fibre or nylon grade performs better under load - available in 9 colours; 1kg spools; lead colour PLA CG Black001.
Nozzle 190-220°C
Buyers increasingly have to answer a sustainability question, and 'it is just PLA' is no longer an answer. This grade is produced from plant-derived PLA resin, a renewable feedstock rather than a fossil-based polymer, so a distributor can put credible eco material wording on the shelf and in the listing instead of vague green claims, while the print behaviour stays standard PLA that any existing profile already handles. RoHS documentation available upon request.
Brittleness often comes from bad winding and inconsistent diameter, not only from the formulation. This filament holds a 1.75mm round profile and is wound on a round spool in one continuous strand, with approx. 335 m of filament on every 1 kg net filament per spool, so a full set of parts prints from a single spool without a changeover or a splice in the middle of the plate.
Printing a tougher PLA should not need a new machine or a new profile. Nozzle window 190-220 °C, no heated bed requirement published, works on standard desktop FDM printers with a 0.4mm nozzle and a 1.75mm filament path, including Bambu Lab and Creality style machines. Standard PLA cooling and retraction settings apply, so a first test print needs no recalibration cycle.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Eco-Friendly Strong Basic PLA Filament 1.75mm 1kg Solid Colors prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | eco-friendly-strong-basic-pla-solid-colors |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
