Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Glow Green Lotus 
PLA Glow Green 
Silk Tri-Color PLA Combo Pack4 
Glow PLA Combo Pack4 
PLA Silk Tri-Color Blue + Green + Magenta 
PLA Silk Tri-Color Blue + Green + Orange Brand: Yiqiu3D · Glow prints usually cost you the surface finish: the luminous pigment goes in and the model comes out chalky and dull in daylight. This filament pairs a light-charged glow pigment with a glossy silk finish, so a figurine or prop shows the sheen under normal light, takes on the glow effect once the lights are down, and stops looking like plain matte plastic in every other room.
It is a PLA plastic with a light-charged glow pigment, and part of the range also carries the silk compound: the glow colours emit a soft light after being charged under a bright lamp or daylight, while the silk colourways give a glossy sheen. The effect is qualitative, so charge time and afterglow vary with print thickness, pigment load and the light source used. It is a plastic, not a metal or stone.
Full answers belowBest for: For figurine batches and cosplay armour where the finish is part of the value - available in 9 colours; lead colour PLA Glow Moonbow. Not ideal for: Not for load-bearing assemblies; choose a CF or nylon grade when strength is critical - available in 9 colours; lead colour PLA Glow Moonbow.
Nozzle 200-225°C
Night-market and party prints need more than one colour option, otherwise every stall carries the same green. This series lists 9 colourways, with four glow colours led by Glow Moonbow and Glow Green Lotus, plus silk tri-colour and glow combo packs in the same range. Build a display that shifts between glow and sheen as the lighting changes.
A glow spool that jams is a wasted batch: pigment masterbatch can change how the melt behaves. This filament holds a 1.75mm diameter tolerance and stable melt flow, so the extruder grip does not slip and the printed bead stays even across a long night run. It prints at, with the setting confirmed for your application.
For print farms and resellers the cost of a glow line is rework: props that will not match the sample sent to the buyer. Each spool is wound with in-line diameter gauging, dye lots are kept segregated and every spool is vacuum sealed, so a reordered glow colour arrives with the same tone and the same glow performance as the first batch.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Silk PLA Glow-in-the-Dark and Tri-Color Combo Pack prints best at 200-225°C nozzle.
| Nozzle Temp | 200-225°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 0.385 kg |
|---|---|
| Spool Size (L×W×H) | 16.5 × 15.5 × 4.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | silk-pla-glow-in-the-dark-tri-color-combo-pack |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
