Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA CG White002 
PLA CG Blue004 
PLA CG Yellow005 
PLA CG Green006 
PLA CG Orange011 
PLA TM 010 Transparent Color (Original Color) Brand: Yiqiu3D · Print-farm throughput is capped the moment the extruder outruns the strand: filament that cannot melt fast enough leaves thin walls, gaps and blobs on parts that printed perfectly at slow speed. This high-speed PLA grade is built for the opposite case - a PLA specified for high-speed, high-flow printing, with a steady melt across the 190-220 °C window so a fast profile keeps filling walls instead of starving the nozzle.
It is specified for high-speed, high-flow printing: the strand is made to melt quickly and evenly so a fast profile fills walls instead of starving the nozzle. Push a budget PLA past its flow limit and the same file that printed cleanly at slow speed comes off the plate with thin walls, gaps and blobs. This grade is bought for throughput, not as a strength upgrade over standard PLA.
Full answers belowBest for: For architectural and scale models where dimensional consistency across a set matters - available in 9 colours; 1kg spools; lead colour PLA CG Black001. Not ideal for: Avoid where the part must flex or absorb impact - TPU is the better material there - available in 9 colours; 1kg spools; lead colour PLA CG Black001.
Nozzle 190-220°C
Black is the lead colour and ships first: a deep, opaque black that keeps layer lines quiet on visible faces and photographs without gloss hotspots for a listing main image. The grade lists 9 colour options, so a farm can standardise on one profile and still ship colour variation to its own customers
the shade list is confirmed with the supplier per order, so the colour approved in writing is the colour that ships.
1.75mm diameter on a standard round spool, 1 kg net filament per spool, and approximately 335 m of strand per spool, with a nozzle window of 190-220 °C. Diameter and melt window are the two figures that decide whether a fast profile runs clean, and both are held per spool, so a spool can move between machines without re-tuning the profile that was proved on the first one.
Drop-in on the 1.75mm FDM machines a farm already runs - Bambu Lab, Creality, Prusa and similar direct-drive or Bowden printers - on the high-speed PLA profile that is already loaded, with no enclosure and no hardened nozzle. The round spool seats in a standard holder or dry box without an adapter, and the even wind keeps the strand feeding through the last metres of a long production run instead of snagging near an empty spool.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D High Speed PLA Filament 1.75mm 1kg prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 20.5 × 20.5 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | high-speed-pla-filament |
| Cross-Section | Round |
| Application | 3D printer filament PLA filament spool |
| Appearance | Standard Single Color |
| Density | Standard PLA Filament Density |
| Payment Method | Payment Before Delivery |
| Packaging | Custom Packaging Available |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
