[Blue] [Glow in the Dark PLA] [] [Blue] [Glow in the Dark PLA] []
[Purple] [Glow in the Dark PLA] [] [Purple] [Glow in the Dark PLA] []

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow

Brand: Yiqiu3D · Prints that vanish in the dark are a wasted wow-factor - Yangcheng Monster glow-in-the-dark PLA charges under light and radiates neon blue, blue-green or purple for hours, turning night lights, toys and keychains into after-dark attractions.

  • Rainbow-glow aesthetics in one filament family: pair the three glowing shades to build ombre night scenes
  • Glow pigments can clog nozzles if the carrier is cheap
  • our glow PLA keeps a stable 1.75mm strand with smooth winding so the luminescent particles flow evenly and print reliably.
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

How does glow-in-the-dark filament work?

Glow PLA contains strontium aluminate phosphors that absorb light energy and re-emit it slowly in the dark. Charge the part under bright light for 10-30 minutes and it glows for hours, fading gradually depending on pigment load.

Full answers below

Is it right for my project?

Best for: For plumbing-adjacent brackets and supports where chemical splash is a real risk - available in 4 colours; 1kg spools. Not ideal for: Avoid for food-contact without a certified grade; confirm compliance with us first - available in 4 colours; 1kg spools.

Print settings

Nozzle 230-260°C

01 · Why this one

Product highlights

4 reasons

Rainbow-glow aesthetics in one filament family: pair the three glowing shades to build ombre night scenes, signage and kids' room decor that glow softly without any wiring or LED.

Glow pigments can clog nozzles if the carrier is cheap

our glow PLA keeps a stable 1.75mm strand with smooth winding so the luminescent particles flow evenly and print reliably.

Simple 220°C printing on Bambu Lab, Creality and Prusa makes glow projects easy for hobbyists, schools and small makers - just print, charge under light, and watch it glow.

Up Close

Gallery

Product Images

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product ImagesGlow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product ImagesGlow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product ImagesGlow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product ImagesGlow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product ImagesGlow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Product Images

Spec Sheet

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Spec Sheet

Close-up

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Close-up

Scene

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow prints best at 230-260°C nozzle.

Nozzle Temp230-260°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Length330±5m
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.yangcheng-monster-glow-in
Product Name 3D Printing Consumables - Glow-in-the-Dark Series
Grade 3D Printing Consumables - Glow-in-the-Dark Series
Cross-Section Round
Item No. 3D Consumables - Glow-in-the-Dark Series
Application 3D Printing PLA Filament
Appearance Round Spool
Length 330±5m
Before You Ask

Frequently Asked Questions

How does glow-in-the-dark filament work?
Glow PLA contains strontium aluminate phosphors that absorb light energy and re-emit it slowly in the dark. Charge the part under bright light for 10-30 minutes and it glows for hours, fading gradually depending on pigment load.
Will it print on my Bambu Lab or Creality machine?
Yes. It is standard 1.75mm PLA, so it runs on Bambu Lab, Creality, Prusa and Anycubic with the PLA preset at 220°C. No special hardware is needed, though a hardened nozzle extends life with abrasive glow pigments.
What print settings should I use?
Nozzle 220°C (per data sheet), bed 50-60°C, 0.4mm nozzle, moderate speeds of 40-80mm/s. Glow pigments can be slightly abrasive; keep extrusion steady and avoid very slow dwell times that cause buildup.
How long does a 1kg spool last?
About 330m of filament. Night lights, keychains and toys (10-30g) print 30-100 times per spool; larger decor pieces fewer. Thin walls glow best, so low infill extends yield.
Which glow colors are available?
Three glowing shades - blue, blue-green and purple - let you build ombre and rainbow-glow effects in one product family. They glow softly in different hues, great for signage, night lights and kids' decor.
What speed range works best?
40-80mm/s is reliable; the first layer at 20-30mm/s. Glow pigment slightly roughens the melt, so consistent speed and temperature keep surface smooth and glow uniform.
Is it for toys and decor or functional parts?
It shines for toys, keychains, night lights, signage, escape-room props and kids' room decor. As PLA it is decorative and light-use - not for load-bearing or high-heat applications.
How should I store glow filament?
Store it dry and sealed with desiccant; the phosphors are fine, but moisture degrades print quality. Keep away from prolonged strong UV when stored, and charge printed parts under normal light before use.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Glow-in-the-Dark PLA Filament 1.75mm, Rainbow Neon Glow

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→