Why is PETG good for repeated prototype runs?
Its toughness absorbs handling and flexing without snapping, and stable diameter keeps extrusion consistent between sessions, so iterations need fewer setting changes.
Full answers below
White PETG 3D Printer Filament 1.75mm 1kg Vacuum Sealed Wholesale Available High Toughness FDM Printing
Brand: Yiqiu3D · Model: 202609300000809 · Tough PETG formulation bends where PLA would snap, holding layer adhesion through prototype iterations, snap fits and light outdoor use.
- Vacuum sealed with desiccant straight off the line - moisture stays out from packing to printing
- 1.75mm diameter with ±0.03mm laser-measured tolerance and 1kg net spool
- 100% inspection before packing on every batch.
Diameter 1.75mm
Material PETG
Quick Answer
Is it right for my project?
Best for: Prototypes
Print settings
Nozzle 220°C · Bed 70-80°C
01 · Why this one
Product highlights
4 reasonsVacuum sealed with desiccant straight off the line - moisture stays out from packing to printing, protecting nozzle flow and surface quality.
1.75mm diameter with ±0.03mm laser-measured tolerance and 1kg net spool
100% inspection before packing on every batch.
Aimed at prototype shops: iteration after iteration without re-tuning, since color and diameter stay consistent between batches.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Available Colors
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Print Profile
White PETG 3D Printer Filament 1.75mm 1kg Vacuum Sealed Wholesale Available High Toughness FDM Printing prints best at 220°C nozzle, 70-80°C bed.
| Nozzle Temp | 220°C |
|---|---|
| Bed Temp | 70-80°C |
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | white-petg-3d-printer-filament-vacuum-sealed-wholesale |
| Material | PETG |
| Application | 3D Printer |
| Cross-Section Shape | Round |
| Product Name | PETG |
| Diameter | 1.75mm |
| Appearance | Round |
Before You Ask
Frequently Asked Questions
Why is PETG good for repeated prototype runs?
Its toughness absorbs handling and flexing without snapping, and stable diameter keeps extrusion consistent between sessions, so iterations need fewer setting changes.
Does it work on standard printers?
It is compatible with mainstream 1.75mm FDM printers using standard PETG profiles; no hardware changes are needed.
What nozzle temperature works?
Recommended nozzle range is 230-260°C. Start mid-range, then fine-tune per printer; the spool label carries the final settings.
How much can I print with one spool?
Weigh a finished part and divide 1kg by that weight for a quick estimate; wall thickness, infill and layer height move the result.
Is the white consistent between batches?
Yes - color and diameter are verified per batch under our inspection process, which matters most for print farms running repeat orders. Shade names follow the catalog.
What parts is it suited for?
Prototypes, jigs and fixtures, snap-fit fittings and outdoor-exposure parts where toughness matters more than rigidity.
How does the packaging protect the filament?
Spools are vacuum sealed with desiccant right off the line, blocking moisture during storage and shipping; re-seal after each use.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order