How does carbon fiber change PETG?
CF filler increases stiffness and dimensional stability and reduces warping; layer impact toughness is somewhat lower than plain PETG - an honest trade-off for rigid parts.
Full answers below
Blue 
Purple 
Army Green 
Orange Red Carbon Fiber PETG Filament 1.75mm 1kg Consistent Roundness Carbon Fiber Reinforced ±0.03mm Tolerance
Brand: Yiqiu3D · Model: 202609300000787 · Carbon fiber reinforcement raises stiffness and dimensional stability over plain PETG for brackets and fixtures.
- Consistent roundness from laser gauging keeps abrasive CF-filled filament feeding without surging.
- Matte carbon-fiber surface gives finished functional parts a technical
- Hardened steel nozzle recommended - the CF filler is abrasive and wears brass nozzles quickly.
Diameter 1.75mm
Material PETG
Quick Answer
Is it right for my project?
Best for: Jigs and fixtures; tooling; rigid structural prototypes; engineering brackets; drone and RC parts Not ideal for: High-flex or high-impact parts; transparent parts; continuous high-temperature service; food-contact items
Print settings
Nozzle 220°C · Bed 70-80°C
01 · Why this one
Product highlights
3 reasonsConsistent roundness from laser gauging keeps abrasive CF-filled filament feeding without surging.
Matte carbon-fiber surface gives finished functional parts a technical, low-glare look.
Hardened steel nozzle recommended - the CF filler is abrasive and wears brass nozzles quickly.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Print Profile
Red Carbon Fiber PETG Filament 1.75mm 1kg Consistent Roundness Carbon Fiber Reinforced ±0.03mm Tolerance prints best at 220°C nozzle, 70-80°C bed.
| Nozzle Temp | 220°C |
|---|---|
| Bed Temp | 70-80°C |
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | 330m |
| Spool Size (L×W×H) | 20.5 × 20.5 × 6.5 cm |
| Pack Format | Piece |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | red-carbon-fiber-petg-filament-consistent-roundness-carbon |
| Material | PETG |
| Application | 3D Printing |
| Cross-Section Shape | Round |
| Product Name | PETG Semi-Transparent Gradient |
| Appearance | Round |
| Length | 330m |
Before You Ask
Frequently Asked Questions
How does carbon fiber change PETG?
CF filler increases stiffness and dimensional stability and reduces warping; layer impact toughness is somewhat lower than plain PETG - an honest trade-off for rigid parts.
Which nozzle should I use?
Any mainstream 1.75mm FDM printer can run it, but a hardened steel nozzle is recommended because carbon fiber filler is abrasive to brass.
What print settings do you recommend?
Carbon fiber PETG settings depend on the machine and filler loading - refer to the material parameter sheet and TDS we provide with your order, and tune from there.
How many parts per spool?
Divide 1000 g by the sliced part weight from your slicer. Rigid parts often print with higher infill, so weigh a real job before planning batches.
Does the carbon look stay consistent?
The matte carbon surface tone is checked against a kept batch reference so repeat orders look the same on your production line.
Can you provide compliance documents for industrial procurement?
Yes - RoHS/REACH/MSDS documents are issued by our supplier or a third party, available on request; we can forward them with your order.
What is CF PETG not right for?
High-flex or high-impact parts, transparent parts, and continuous high-temperature service - for those choose Nylon, PLA+ or an engineering polymer.
How should I store this spool?
Keep it vacuum sealed with desiccant and dry before printing; damp CF PETG prints with bubbles and rough surfaces.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order