Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PETG Green White 
PETG Blue Green 
PETG Blue White Orange 
PETGWinter Soft Tone Brand: Yiqiu3D · Model: PETG 1.75mm 1kg · A translucent wall shows every defect: a gap, a bubble or a weak layer line reads as a stripe inside a lampshade or display cover, and one dull patch scraps the whole part. This semi-transparent PETG is extruded round at 1.75 mm and wound tight for steady flow, so the wall stays even and spreads light smoothly with no seams or hot spots. Nozzle range 230-260 °C, 1 kg net filament per spool, vacuum-sealed with a desiccant pack so moisture never becomes a bubble in the wall.
It is a 1.75 mm PETG that prints into a light-diffusing wall rather than a solid opaque one: light passes through the part and spreads softly, which is why this grade suits lampshades, diffusers and display covers. We do not publish a transmission percentage, because the finished look depends on wall thickness, infill and layer height - print a test piece in your own geometry before a full run.
Full answers belowBest for: For durable, moisture- and chemical-resistant parts - outdoor enclosures, brackets and water-adjacent jigs - available in 6 colours; 1kg spools; lead colour PETG Blue White. Not ideal for: Not for high-temperature engine-adjacent parts; use ABS or PC above ~70C - available in 6 colours; 1kg spools; lead colour PETG Blue White.
Nozzle 230-260°C · Bed 70-80°C
Published parameters: PETG, 1.75 mm diameter, nozzle range 230-260 °C, round spool, 1 kg net filament per spool. Layer bonding matters more here than in an opaque color, because in a semi-transparent part the interface between layers is part of the visible surface
the strand is wound under tension so extrusion stays even from first layer to last. We do not publish a heated bed temperature for this grade.
Fits standard 1.75 mm FDM printers and common 1 kg spool holders, including Bambu Lab and Creality style machines. Translucent parts show moisture first, so keep the spool in its sealed bag until it goes on the holder, dry it if it has been open in humid air, and print at a steady speed with part cooling set for a clean, streak-free wall.
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | PETG |
Semi-Transparent PETG Filament 1.75mm 1kg Multi-Color Gradient prints best at 230-260°C nozzle, 70-80°C bed.
| Nozzle Temp | 230-260°C |
|---|---|
| Bed Temp | 70-80°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 6.5 cm |
| Pack Format | Pcs |
A translucent wall shows every defect: a gap, a bubble or a weak layer line reads as a stripe inside a lampshade or display cover, and one dull patch scraps the whole part. This semi-transparent PETG is extruded round at 1.75 mm and wound tight for steady flow, so the wall stays even and spreads light smoothly with no seams or hot spots. Nozzle range 230-260 °C, 1 kg net filament per spool, vacuum-sealed with a desiccant pack so moisture never becomes a bubble in the wall.
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | semi-transparent-petg-multi-color-gradient-lampshades-bambu |
| Material | PETG |
| Applicable Raw Material | petg |
| Application Scenario | 3D Printing |
| Main Sales Regions | Africa, Europe, South America, Southeast Asia, North America etc. |
Everything we publish for this material, in one place.
