Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Brand: Yiqiu3D · Brackets and housings that soften or creep in a warm workshop stall the machine they hold. This is an ABS grade built for that heat: run it in an enclosed chamber with a heated bed and ventilation, and printed walls hold their shape in warm surroundings instead of sagging. For jigs, fixtures and covers that must stay rigid in service, that is the property that decides the print.
It is ABS, so it holds its shape in warm service because of the material's own glass-transition behaviour, not an additive or a filler. Printed as a consistent 1.75 mm strand inside an enclosed chamber with a heated bed, the part cools evenly and keeps its geometry, so brackets, covers and fixtures stay rigid in warm surroundings instead of creeping out of shape.
Full answers belowBest for: Suits mechanical housings and fixtures that must hold shape in warm environments - 1kg spools; lead colour Any Color (Note in Order). Not ideal for: Not for fine decorative prints; PLA or resin gives cleaner surface detail - 1kg spools; lead colour Any Color (Note in Order).
Nozzle 240-260°C
Colour is made to order: state your target shade when ordering, and the line is set to your colour. There is no fixed swatch list, which is the point for buyers who need a housing, cover or fixture to match equipment or a brand colour already in service. Send the shade and quantity with the request, and the colour is produced to that target.
1.75 mm round strand, dimensional tolerance checked before packing, approximately 330 m per 1 kg net filament per spool. Consistent diameter matters at high temperature profiles: the melt stays even, flow stays predictable and the wall thickness you planned is the wall thickness you get, batch after batch, without a re-tune between spools.
Moisture decides ABS quality: a damp spool prints with bubbles, weak layer bonding and rough surfaces. Keep the spool sealed until use and dry an open spool before a long build. The nozzle setting is confirmed per application, printed in an enclosed chamber with a heated bed, with ventilation because ABS emits fumes. Vapour smoothing with acetone is possible after printing.
| Diameter | 1.75mm |
|---|---|
| Material | ABS |
ABS Filament 1.75mm 1kg High-Temperature Durable prints best at 240-260°C nozzle.
| Nozzle Temp | 240-260°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Length | 330m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | abs-high-temperature-durable-creality-prusa |
| Product Name | ABS Filament |
| Grade | WL-002 |
| Cross-Section | Round |
| Item No. | WL-002 |
| Application | 3D Printing Consumables |
| Appearance | Rolled |
| Length | 330m |
Everything we publish for this material, in one place.
