Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Basic Ice Blue 
Basic Klein Blue 
Basic Blue 
Basic Yellow 
Basic Green 
Basic M Mint Green Brand: Yiqiu3D · Functional parts cracking under load? This upgraded PLA is formulated for strength and bend resistance, so industrial jigs, fixtures and snap-fit assemblies hold their geometry instead of failing early.
The upgraded formula raises rigidity and flexural strength while keeping the material tough rather than brittle, so parts resist bending loads and repeated snap-fit cycles far better than standard PLA.
Full answers belowBest for: Ideal for models, prototypes and indoor decor where crisp detail and the lowest cost per part matter most - available in 9 colours; 1kg spools; lead colour Basic Warm White. Not ideal for: Not for hot-car interiors or load-bearing parts; use PETG or ABS where heat and impact resistance matter - available in 9 colours; 1kg spools; lead colour Basic Warm White.
Nozzle 190-220°C
Ice Blue, Cyan, Klein Blue, Blue, Yellow, Orange, Green and Mint Green — with consistent saturation that keeps assembled multi-part products looking uniform.
Round cross-section with consistent density and tight spooling from a Dongguan production line, laser-measured 1.75mm diameter, so dimensional accuracy carries through every layer.
Prints at 220°C straight into functional parts on Bambu Lab and other 1.75mm machines, with a 48-hour dispatch promise that keeps rush production orders moving.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Upgraded PLA prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 20 × 5.5 × 20 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | upgraded-pla-3d-printer-filament-high-strength-bend |
| Product Name | PLA Basic Filament |
| Cross-Section | Round |
| Application | 3DPrinting |
| Appearance | Circular |
| Density | 1.26-1.4g/m3 |
| Payment Method | Payment Before Delivery |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
