White White
Blue Blue
Gray Gray
Red Red
Silver Silver
Transparent Color Transparent Color

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints

Brand: Yiqiu3D · Strings, clogs and rough walls make PLA feel like a gamble: this PLA is compounded for smooth, clog-free extrusion, so first layers stick and walls come out clean print after print.

  • Eight ready colors
  • Every spool is 1kg
  • Beginner-friendly by design: a 220°C nozzle profile
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

Why does this PLA print so smoothly?

PLA is a low-warp, low-odour thermoplastic, and this grade is compounded with a clean-melting formulation that reduces stringing and clogging. Because it flows evenly at the 220°C nozzle temperature shown on the label, first layers adhere well and walls stay clean without exotic settings.

Full answers below

Is it right for my project?

Best for: For quick visual mock-ups where print speed and surface quality beat mechanical strength - available in 9 colours; 1kg spools; lead colour Black. Not ideal for: Avoid for parts that will sit in a hot car or take repeated knocks; PETG or ABS suits better - available in 9 colours; 1kg spools; lead colour Black.

Print settings

Nozzle 190-220°C

01 · Why this one

Product highlights

3 reasons

Eight ready colors, White, Orange, Blue, Gray, Red, Green, Silver and Transparent, cover crisp solids, a metallic silver sheen and a see-through option for lithophanes and light-diffusing parts, all in one consistent line.

Every spool is 1kg, diameter-controlled with laser-measured tolerance and evenly wound, so long prints feed steadily without jams or width jumps.

Beginner-friendly by design: a 220°C nozzle profile, mild odour and forgiving first layers make it a reliable choice on Bambu Lab, Creality, Prusa and Anycubic machines for everyone from students to studios.

Up Close

Gallery

Product Images

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints — Product Images

Spec Sheet

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints — Spec Sheet

Close-up

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints — Close-up

Scene

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints prints best at 190-220°C nozzle.

Nozzle Temp190-220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Lengthapprox. 335m
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.pla-filament-spool-8-colors-neatly-wound-smooth-prints-3d
Diameter 1.75mm
Length approx. 335m
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why does this PLA print so smoothly?
PLA is a low-warp, low-odour thermoplastic, and this grade is compounded with a clean-melting formulation that reduces stringing and clogging. Because it flows evenly at the 220°C nozzle temperature shown on the label, first layers adhere well and walls stay clean without exotic settings.
Will it fit my printer?
Yes, it is standard 1.75mm filament that works with direct-drive and Bowden extruders alike. Bambu Lab, Creality, Prusa and Anycubic models all accept it, and no enclosure or hardened nozzle is needed.
What settings should I start with?
Start at the 220°C nozzle temperature on the label, a mildly heated bed for the first layer, and moderate speed. Lower the speed slightly for fine details; if you see stringing, add a small retraction increase rather than changing temperature drastically.
How long does a 1kg spool last?
A 1kg spool feeds a great many prints. A typical phone stand uses only a small fraction of the spool, while dense functional parts with high infill consume more; slice your model to plan your material budget.
What are the eight colors like?
White, Orange, Blue, Gray, Red and Green are clean solids, Silver gives a metallic sheen, and Transparent Color is a see-through option. All are batch-controlled so reorders match your first delivery.
What speed range works best?
PLA tolerates a wide speed range; 40-80 mm/s is a common sweet spot, with a slower outer wall for the smoothest surface. You can speed up infill once the outer walls look clean.
Is it for prototypes or finished parts?
Both. PLA's low cost and fine detail make it ideal for prototypes, display models and decorative objects; for parts that must carry heavy load or resist heat, consider a tougher material, but for most consumer and education prints this PLA is a finished-part choice.
How should I store it?
Keep the spool in its resealable bag with the desiccant pouch away from sunlight and humidity. PLA is less moisture-sensitive than nylon or PETG, but a dry spool always prints more consistently.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on PLA Filament 1.75mm 1kg Spool 8 Colors Neatly Wound Smooth Prints

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→