Will it work with Bambu Lab or Creality?
Yes — 1.75mm standard diameter runs on Bambu Lab, Creality, Prusa, Anycubic and most FDM machines. The round profile feeds reliably in direct and Bowden extruders.
Full answers below
PETG White 
PETG Gray 
PETG Deep Gray 
PETG Skin Tone 
PETG Red 
PETG Pink Yiqiu3D 1.75mm 1KG PETG Filament 8 Colors Skin Tone Series Strong Durable Low Price
Brand: Yiqiu3D · Skin-tone filaments always look wrong? Our Skin Tone and Deep Skin Tone shades are calibrated for natural figures, dolls and prosthetics projects.
- Inconsistent PETG causes stringing and weak layers? Our lines are run with tight diameter control and clean drying
- PETG warps on open-frame printers? This easy formulation prints at 220°C with good bed adhesion on Bambu Lab
Diameter 1.75mm
Material PETG
Quick Answer
Is it right for my project?
Best for: A strong all-rounder for end-use parts needing toughness and easy printing without a heated chamber - available in 9 colours; 1kg spools; lead colour PETG Black. Not ideal for: Avoid where very fine cosmetic detail leads; PLA or resin prints cleaner surfaces - available in 9 colours; 1kg spools; lead colour PETG Black.
Print settings
Nozzle 230-260°C
01 · Why this one
Product highlights
2 reasonsInconsistent PETG causes stringing and weak layers? Our lines are run with tight diameter control and clean drying, so extrusion stays steady and parts come out strong.
PETG warps on open-frame printers? This easy formulation prints at 220°C with good bed adhesion on Bambu Lab, Creality and other common machines, minimizing curl.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Print Profile
Yiqiu3D 1.75mm 1KG PETG Filament 8 Colors Skin Tone Series Strong Durable Low Price prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | approx. 325m |
| Spool Size (L×W×H) | 20 × 20 × 6.5 cm |
| Pack Format | Roll |
| Spool Type | Round Spool |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | petg-filament-8-colors-skin-tone-series-strong-durable-low |
| Material | PETG |
| Suitable for Material | PETG |
| Product Weight | Net Weight1kg |
| Length | approx. 325m |
| Appearance | Round Spool |
Before You Ask
Frequently Asked Questions
Will it work with Bambu Lab or Creality?
Yes — 1.75mm standard diameter runs on Bambu Lab, Creality, Prusa, Anycubic and most FDM machines. The round profile feeds reliably in direct and Bowden extruders.
What print settings are best?
Print at 220°C nozzle with a 60-80°C bed. Clean the bed before printing and avoid excessive cooling fan for better layer bonding.
How long does one spool last?
A 1KG spool typically prints 90-130 hours depending on infill and model size. Functional parts with dense infill consume filament faster than light prototypes.
Are the skin tones realistic?
Yes — Skin Tone and Deep Skin Tone are formulated from calibrated pigment blends for natural human skin shades, suited to figures, dolls, mannequins and prosthetics studies.
What speed should I use?
Print at 40-80 mm/s; 50-60 mm/s gives the best balance for PETG. Keep retraction low to reduce stringing.
Is this PETG for functional parts?
Primarily yes — PETG's impact and moisture resistance make it great for brackets, cases, tool holders and outdoor-use parts, while the skin tones expand it into figurine work.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order