What is PLA+ and why is it tougher than standard PLA?
PLA+ adds impact modifiers and stabilizers to the PLA base, raising toughness and reducing brittleness, while keeping the same easy, low-odor printing behavior as standard PLA.
Full answers below
![Black [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-1.webp)
Black [PLA+/] ![Olive Green [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-3.webp)
Olive Green [PLA+/] ![Green [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-4.webp)
Green [PLA+/] ![Apple Green [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-5.webp)
Apple Green [PLA+/] ![Cyan [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-7.webp)
Cyan [PLA+/] ![Ice Blue [PLA+/]](/images/products/wholesale-wood-effect-pla-filament-3d-printer-filament/swatch-8.webp)
Ice Blue [PLA+/] Wholesale Wood Effect PLA+ Filament 1.75mm
Brand: Yiqiu3D · One material, one look gets boring fast? This wood-effect PLA+ spans eight colors from natural wood tone to ice blue, so themed décor, planters and props can be produced in a single reliable line.
- Laser-measured 1.75mm diameter
- PLA+ toughness with PLA ease: it prints at 220°C on Bambu Lab and other FDM machines with low warp and clean layer adhesion
Diameter 1.75mm
Material PLA
Quick Answer
Is it right for my project?
Best for: Suits crafts and cosplay parts where a warm wood texture and post-sanding finish are part of the value - available in 9 colours; lead colour Ultra White [PLA+/]. Not ideal for: Avoid for outdoor or wet environments - moisture affects the finish; choose ASA instead - available in 9 colours; lead colour Ultra White [PLA+/].
Print settings
Nozzle 220°C
01 · Why this one
Product highlights
2 reasonsLaser-measured 1.75mm diameter, tangle-free winding and vacuum-sealed, desiccant-packed rolls keep geometry and moisture consistent batch after batch.
PLA+ toughness with PLA ease: it prints at 220°C on Bambu Lab and other FDM machines with low warp and clean layer adhesion, no enclosure needed.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Print Profile
Wholesale Wood Effect PLA+ Filament 1.75mm prints best at 220°C nozzle.
| Nozzle Temp | 220°C |
|---|
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 6.2 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
What You Receive
Laser-measured 1.75mm diameter, tangle-free winding and vacuum-sealed, desiccant-packed rolls keep geometry and moisture consistent batch after batch.
- Vacuum-sealed bag
- Desiccant pack
- Arrives dry and ready to print
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | wholesale-wood-effect-pla-filament-3d-printer-filament |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Before You Ask
Frequently Asked Questions
What is PLA+ and why is it tougher than standard PLA?
PLA+ adds impact modifiers and stabilizers to the PLA base, raising toughness and reducing brittleness, while keeping the same easy, low-odor printing behavior as standard PLA.
Will this filament work with my printer?
Yes — it is standard 1.75mm filament on a 1kg spool, compatible with Bambu Lab, Creality, Prusa and most FDM printers with a heated bed.
What settings should I use?
Set the nozzle to 220°C, the bed to 45-60°C, print the first layer at 20-30mm/s, and run 40-70mm/s for clean surfaces.
How much can I print from one spool?
One 1kg spool holds roughly 330 meters of 1.75mm filament — about 20-40 medium parts depending on infill and size.
What do the 8 colors look like?
Wood has a natural matte timber look; Olive Green, Green, Apple Green, Turquoise, Cyan and Ice Blue form a fresh green-to-blue spectrum, and Black grounds the palette.
What speed range is recommended?
30-80mm/s is safe; 40-70mm/s gives the best balance of surface quality and throughput.
What should I print with this wood-effect PLA+?
It is a décor and lifestyle material — planters, vases, toys, props and themed ornaments — with enough toughness for everyday household items.
How should I store the rolls?
Keep rolls vacuum-sealed with desiccant, dry and below 25°C; if stringy from humidity, dry at 45-50°C for 4-6 hours.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order