PLA White PLA White
PLA Gray PLA Gray
PLA Dark Gray PLA Dark Gray
PLA Skin Tone PLA Skin Tone
PLA Blue PLA Blue
PLA Lake Blue PLA Lake Blue

Factory Wholesale PLA

Brand: Yiqiu3D · Tired of juggling five different spools to cover your projects? This single PLA line ships in 8 coordinated shades — White, Warm White, Gray, Dark Gray, Skin Tone, Wood Simulation, Blue and Lake Blue — so figurine, cosplay and decoration makers can finish a whole batch with one supplier.

  • Prints that look dull or washed out kill the wow factor
  • Layer gaps, air bubbles and jams waste hours of machine time
  • No more trial-and-error tuning
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

Why does this PLA print so easily without warping or clogging?

PLA is the most forgiving 3D printing material because it flows at low temperature and shrinks very little when cooling. Our PLA is compounded from pure virgin resin with a consistent melt flow, so it stays dimensionally stable in the 200-230°C nozzle window and resists warping even on simple print surfaces.

Full answers below

Is it right for my project?

Best for: Great for signage, props and prototypes that need to look right rather than survive abuse - available in 9 colours; lead colour PLA Black. Not ideal for: Avoid for anything outdoors or under sustained heat; choose ASA or ABS instead - available in 9 colours; lead colour PLA Black.

Print settings

Nozzle 190-220°C

01 · Why this one

Product highlights

3 reasons

Prints that look dull or washed out kill the wow factor

these PLA colors are formulated with rich pigment loading for saturated, photo-ready surfaces straight off the printer.

Layer gaps, air bubbles and jams waste hours of machine time

every spool is produced under strict diameter control and laser-measured tolerance, wound tightly on a consistent spool for reliable feeding.

No more trial-and-error tuning

with a forgiving 200-230°C printing window and no heated-chamber requirement, this PLA works right away on Bambu Lab, Creality, Prusa and other mainstream machines.

Up Close

Gallery

Product Images

Factory Wholesale PLA — Product ImagesFactory Wholesale PLA — Product ImagesFactory Wholesale PLA — Product ImagesFactory Wholesale PLA — Product ImagesFactory Wholesale PLA — Product ImagesFactory Wholesale PLA — Product Images

Spec Sheet

Factory Wholesale PLA — Spec Sheet

Close-up

Factory Wholesale PLA — Close-up

Scene

Factory Wholesale PLA — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

Factory Wholesale PLA prints best at 190-220°C nozzle.

Nozzle Temp190-220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Spool Size (L×W×H)20 × 20 × 6.5 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.factory-wholesale-pla-3d-printer-filament-8-color-set-skin
Diameter 1.75mm
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why does this PLA print so easily without warping or clogging?
PLA is the most forgiving 3D printing material because it flows at low temperature and shrinks very little when cooling. Our PLA is compounded from pure virgin resin with a consistent melt flow, so it stays dimensionally stable in the 200-230°C nozzle window and resists warping even on simple print surfaces.
Will it work on my Bambu Lab, Creality or Prusa printer?
Yes — 1.75mm PLA is the universal standard for consumer and hobbyist machines. It feeds through any direct-drive or Bowden extruder rated for PLA, so Bambu Lab, Creality, Prusa and similar printers can all use it; just confirm your hotend accepts 1.75mm filament.
What print settings do you recommend?
Set the nozzle to 200-230°C (210-215°C is a good starting point), the bed to 45-60°C, and start with a speed of 40-60 mm/s. No heated chamber is required, which keeps setup simple.
How long does one spool last?
A standard 1kg spool of 1.75mm PLA runs approximately 320-340 meters. A typical 20g print — like a small figurine or phone stand — yields about 50 prints per spool, so one roll covers most hobby projects for weeks.
Are the colors consistent between spools and over time?
Yes. Every color batch is matched against a master standard before packing, so White, Gray, Skin Tone or Wood Simulation ordered in different batches look consistent. Keeping spools sealed with the desiccant pouch virtually eliminates color drift.
What is the recommended printing speed range?
This PLA handles 40-80 mm/s comfortably with good quality. For fine details on skin-tone or wood-simulation prints, stay at 40-60 mm/s; for infill and non-visible layers you can push toward 80 mm/s.
Is this for prototypes only, or can I use the prints as finished products?
Both. PLA is excellent for rapid prototyping because it is fast and cheap, and its crisp surface finish and low warping also make it ideal for finished decorative pieces, desk ornaments, toys and props. For parts exposed to heat or load, consider our PETG or ABS+ lines.
How is the filament packaged to keep it dry?
Each spool is vacuum-sealed in a moisture-barrier bag with a desiccant pouch inside, so it arrives dry and ready to print. After opening, store it in the resealable bag or a dry box to avoid brittle, bubbly prints.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Factory Wholesale PLA

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→