ABS+ Natural ABS+ Natural
ABS+ Red ABS+ Red
ABS+ Gray ABS+ Gray

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact

Brand: Yiqiu3D · Parts that soften in a hot car or warp near a warm motor are a real failure — ABS+ resists heat far better than PLA, keeping enclosures, ducts and functional parts stable under warmth.

  • Standard ABS cracks and splits easily
  • ABS that warps off the bed ruins long prints
  • Makers upgrading to ABS+ shouldn't need a new printer
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material ABS
Quick Answer

Why is ABS+ better than regular ABS or PLA?

ABS+ adds toughening modifiers that improve impact strength and layer adhesion over standard ABS, while keeping its heat resistance — parts stay rigid where PLA would soften. It is the usual choice for parts that face warmth and rough handling.

Full answers below

Is it right for my project?

Best for: Best for display models, teaching aids and short-run prototypes needing clean surfaces - available in 5 colours; lead colour ABS+ White. Not ideal for: Not for food-contact or high-friction wear parts; choose PETG or a carbon-fibre grade - available in 5 colours; lead colour ABS+ White.

Print settings

Nozzle 190-220°C

01 · Why this one

Product highlights

3 reasons

Standard ABS cracks and splits easily

the '+' formulation improves impact strength and layer adhesion, so printed parts survive drops and daily handling.

ABS that warps off the bed ruins long prints

our ABS+ is formulated for reduced warping, printing reliably at 220°C with proper settings in an enclosed machine.

Makers upgrading to ABS+ shouldn't need a new printer

this filament works on Bambu Lab, Creality, Prusa and Anycubic with a heated bed and light enclosure.

Up Close

Gallery

Product Images

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact — Product Images

Spec Sheet

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact — Spec Sheet

Close-up

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact — Close-up

Scene

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact — Scene
Technical Data

Specifications

Diameter 1.75mm
Material ABS

Print Profile

ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact prints best at 190-220°C nozzle.

Nozzle Temp190-220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.abs-3d-printer-filament-heat-resistant-high-impact-bambu
Diameter 1.75mm
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why is ABS+ better than regular ABS or PLA?
ABS+ adds toughening modifiers that improve impact strength and layer adhesion over standard ABS, while keeping its heat resistance — parts stay rigid where PLA would soften. It is the usual choice for parts that face warmth and rough handling.
Does my printer need special features?
You need a heated bed (80-100°C), a 220°C-capable hotend, and ideally an enclosure to reduce drafts and warping. Bambu Lab, Creality, Prusa and Anycubic machines with these features handle ABS+ well.
What print settings do you recommend?
Start at 220-240°C nozzle, 90-100°C bed, 40-60 mm/s, fan off or very low for the first layers, and consider a brim for large parts to prevent corner lifting.
How long does a spool last for functional parts?
A 1kg spool of 1.75mm ABS+ is roughly 310-330 meters. Functional parts like ducts or brackets weighing 30-70g yield about 15-30 prints per spool depending on infill.
What colors are available?
This ABS+ line is available in Natural, Black, Red and Gray, with custom color options on request. Colors are batch-matched to keep parts consistent across orders.
What speed range is safe for ABS+?
Print at 40-60 mm/s for quality and strength; you can go up to 80 mm/s for infill. Slower walls improve layer adhesion, which is critical for impact-resistant parts.
Is ABS+ suitable for finished functional products?
Yes — ABS+ is used for finished parts in automotive, appliance and electronics applications: ducts, brackets, housings, trays and tools. It withstands warmth and impact much better than PLA.
How should ABS+ be stored?
Spools ship vacuum-sealed with desiccant. Store in a dry, cool place; while ABS is less moisture-hungry than PETG, dry filament always prints cleaner with better surface finish.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on ABS+ 3D Printer Filament 1.75mm Heat Resistant High Impact

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →