PLA Transparent Pink /roll PLA Transparent Pink /roll
PLA Transparent Light Yellow /Spool PLA Transparent Light Yellow /Spool
PLA Transparent Ice Blue /Spool PLA Transparent Ice Blue /Spool
PLA Transparent Ash Gray /Spool PLA Transparent Ash Gray /Spool
PLA Transparent Green /roll PLA Transparent Green /roll

Transparent PETG Filament 1.75mm

Brand: Yiqiu3D · Clear prints from standard PLA yellow and turn brittle, but this transparent PETG keeps crystal clarity with real toughness — functional clear parts that stay clear and strong through years of use.

  • Seven transparent shades
  • The 1.75 mm line runs 330 meters per roll with a consistent feed and clean winding
  • It prints at the listed 220 °C on Bambu Lab, Creality and other FDM machines
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PLA
Quick Answer

Why is PETG better than PLA for transparent parts?

PETG resists yellowing, moisture and impact far better than PLA, so clear parts keep their clarity and strength in service. It is also tougher and more chemically resistant, making it the standard choice for functional transparent parts.

Full answers below

Is it right for my project?

Best for: Ideal for models, prototypes and indoor decor where crisp detail and the lowest cost per part matter most - available in 8 colours; lead colour PLA Transparent Pink. Not ideal for: Not for hot-car interiors or load-bearing parts; use PETG or ABS where heat and impact resistance matter - available in 8 colours; lead colour PLA Transparent Pink.

Print settings

Nozzle 190-220°C

01 · Why this one

Product highlights

3 reasons

Seven transparent shades

pink, teal, light yellow, ice blue, ash gray, full transparent and green — cover everything from water-clear panels to softly tinted decor.

The 1.75 mm line runs 330 meters per roll with a consistent feed and clean winding, so clear walls print without the bubbles and artifacts that ruin transparent parts.

It prints at the listed 220 °C on Bambu Lab, Creality and other FDM machines

PETG's low-odor, low-warp behavior with the clarity PLA cannot match.

Up Close

Gallery

Product Images

Transparent PETG Filament 1.75mm — Product ImagesTransparent PETG Filament 1.75mm — Product ImagesTransparent PETG Filament 1.75mm — Product ImagesTransparent PETG Filament 1.75mm — Product ImagesTransparent PETG Filament 1.75mm — Product ImagesTransparent PETG Filament 1.75mm — Product Images

Spec Sheet

Transparent PETG Filament 1.75mm — Spec Sheet

Close-up

Transparent PETG Filament 1.75mm — Close-up

Scene

Transparent PETG Filament 1.75mm — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PLA

Print Profile

Transparent PETG Filament 1.75mm prints best at 190-220°C nozzle.

Nozzle Temp190-220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Length330
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatKg
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169050
Item No.transparent-petg-filament-3d-printer-filament-crystal-clear
Product Name PLA Filament
Grade PLA
Item No. PLA
Length 330
Specification PLA-Metal Combo Pack*4
1roll Gross Weight 1.3
Diameter 1.75mm
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why is PETG better than PLA for transparent parts?
PETG resists yellowing, moisture and impact far better than PLA, so clear parts keep their clarity and strength in service. It is also tougher and more chemically resistant, making it the standard choice for functional transparent parts.
Will it work on my printer?
Yes — 1.75 mm PETG runs on Bambu Lab, Creality, Prusa and Anycubic FDM machines. It prints with low odor and minimal warping, which is why it is one of the friendliest engineering filaments for open printers.
What settings should I use?
Use the listed 220 °C nozzle temperature and a 70–80 °C heated bed for good adhesion. Fewer, fatter walls and slightly higher extrusion give the clearest result — bubbles and voids are what cloud transparent prints.
How long does one spool last?
Each roll is 330 meters of 1.75 mm filament. Clear panels, light covers and small housings use modest amounts, so a roll covers several projects — exact yield depends on wall thickness and part size.
How transparent is it really?
The full transparent shade is water-clear when printed with thin, solid walls and high extrusion. The tinted shades — pink, teal, light yellow, ice blue, ash gray and green — add soft color while staying translucent. Expect frosted-glass clarity rather than injection-molded uniformity.
How fast can I print it?
Typical PETG speeds of 40–60 mm/s give the best clarity and layer adhesion. Slower outer walls and consistent extrusion prevent the haze that fast, under-extruded walls produce.
What is it best for?
Light covers, signage, display cases, storage containers, protective panels and functional parts that need to be seen through. PETG's toughness also suits parts that get handled — far more durable than clear PLA.
How should I store it?
PETG absorbs some moisture, so keep the spool sealed with desiccant when idle. Dry filament prints the clearest walls; moist PETG produces the tiny steam bubbles that cloud transparent parts.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Transparent PETG Filament 1.75mm

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→