Will it work with my printer?
Yes, it is standard 1.75mm filament for any FDM machine, including Creality Ender series, Bambu Lab, Prusa and Anycubic. No enclosure or hardened nozzle is required.
Full answers below
PETG Gold 
PETG Skin Tone Pink 
PETG Silver 
PETG Blue 
PETG Green Factory Wholesale PETG Filament 1.75mm
Brand: Yiqiu3D · Limited color lines force compromises: seven shades, Gold, White, Skin Tone Pink, Silver, Blue, Red and Green, cover retail-ready products, from metallics to skin tones, all from one source.
- New operators fear PETG's learning curve: the 220°C nozzle temperature shown on the label and forgiving first layers make it approachable on Creality Ender
Diameter 1.75mm
Material PETG
Quick Answer
Is it right for my project?
Best for: Ideal for mechanical prototypes that must be tested hard and printed again cheaply - available in 8 colours; lead colour PETG Black. Not ideal for: Not for high-friction sliding surfaces; a nylon or POM-style grade wears better - available in 8 colours; lead colour PETG Black.
Print settings
Nozzle 230-260°C
01 · Why this one
Product highlights
1 reasonsNew operators fear PETG's learning curve: the 220°C nozzle temperature shown on the label and forgiving first layers make it approachable on Creality Ender, Bambu Lab and other mainstream machines.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Print Profile
Factory Wholesale PETG Filament 1.75mm prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 22 × 22 × 6 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | factory-wholesale-petg-filament-3d-printer-filament-7 |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Before You Ask
Frequently Asked Questions
Will it work with my printer?
Yes, it is standard 1.75mm filament for any FDM machine, including Creality Ender series, Bambu Lab, Prusa and Anycubic. No enclosure or hardened nozzle is required.
What settings do you recommend?
Use the 220°C nozzle temperature shown on the label, a heated bed for the first layer, and moderate speed with a slightly slower first layer. A thin adhesive film helps PETG release cleanly from the build plate.
How long does one spool last?
Runtime depends on part size and infill; a typical phone stand or bracket uses a small fraction of a spool, while dense functional parts consume more. Slice your model to plan volume orders accurately.
What are the seven colors like?
Gold and Silver give metallic sheens, White, Blue, Red and Green are clean solids, and Skin Tone Pink is a warm flesh tone for figures and art pieces. All seven shades are batch-controlled for reorder consistency.
Is it for prototypes or finished parts?
Both. The combination of low cost and PETG toughness makes it ideal for production of consumer parts, brackets and light functional items; for critical load-bearing engineering parts, a higher-spec grade is better.
How should I store it?
Keep spools in the resealable bag with the desiccant pouch when idle. PETG picks up moisture that causes stringing and bubbles; dried filament at 220°C prints consistently.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order