PLA Matte Ice Blue PLA Matte Ice Blue
PLA Matte Orange PLA Matte Orange
PLA Matte Holly Green PLA Matte Holly Green
PLA Matte Cuban Brown PLA Matte Cuban Brown
PLA Matte Plum Green PLA Matte Plum Green
PLA Matte Dark Green PLA Matte Dark Green

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D

Brand: Yiqiu3D · Model: Matte PLA 1.75mm 1kg · Glossy surfaces hide shape and show every fingerprint on a prototype? Matte PLA Filament uses a non-reflective matte surface that reads form and texture honestly under studio light, so client presentations and product photos show the part instead of the glare. The finish is compounded into the material, so it stays matte after sanding and handling, and each spool is wound from a single batch so repeat prints match. Ask for the matte colour card and Request a Quote.

  • A wide matte palette from one factory: PLA Matte White
  • Parameters for your quotation: 1.75mm diameter
  • Ready for the machines you already run: standard PLA settings on Bambu Lab
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Tolerance ±0.03mm
Material PLA
Quick Answer

Why choose matte PLA for prototypes instead of standard glossy PLA?

Because a matte surface photographs and evaluates more honestly. Gloss reflects studio light and hides curvature, parting lines and surface defects, while a matte surface shows form, texture and layer quality as they really are, which matters when a client or an engineer signs off a prototype. The matting agent is compounded into the pellets, so the effect does not wear off with handling, and the finish stays uniform across a printed assembly.

Full answers below

Is it right for my project?

Best for: A cost-effective route for parts that do not face extreme service conditions - available in 9 colours; 1kg spools; lead colour PLA Matte White. Not ideal for: Not for high-temperature service; a PC or ASA grade is the better route there - available in 9 colours; 1kg spools; lead colour PLA Matte White.

Print settings

Nozzle 195-225°C · Bed 50-60°C

01 · Why this one

Product highlights

3 reasons

A wide matte palette from one factory: PLA Matte White, PLA Matte Ice Blue, PLA Matte Grass Green, PLA Matte Orange, PLA Matte Holly Green, PLA Matte Cuban Brown, PLA Matte Klein Blue, PLA Matte Plum Green and PLA Matte Dark Green in this listing, with further matte and matte-rainbow shades quoted on request for volume orders. One supplier, consistent compounding, and a colour card you can hand to your own customers.

Parameters for your quotation: 1.75mm diameter, round cross-section, 1 kg of filament per spool, nozzle range 195-225°C, PLA grade for 3D printing. Every spool is vacuum-sealed with a desiccant sachet inside a printed box, so it arrives dry and stays dry in storage. Need the data sheet and colour card with your quotation? Request a Quote and tell us the colours you are considering.

Ready for the machines you already run: standard PLA settings on Bambu Lab, Creality, Prusa, Anycubic and other 1.75mm FDM printers, direct-drive or Bowden, no enclosure required. The 195-225°C range is wide enough for fast prototype iterations and fine-detail prints from the same spool, and the even wind keeps long unattended jobs feeding smoothly.

Up Close

Gallery

Product Images

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product ImagesMatte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product ImagesMatte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product ImagesMatte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product ImagesMatte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product ImagesMatte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Product Images

Spec Sheet

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Spec Sheet

Close-up

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Close-up

Scene

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D — Scene
Technical Data

Specifications

Diameter 1.75mm
Tolerance ±0.03mm
Material PLA

Print Profile

Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D prints best at 195-225°C nozzle, 50-60°C bed.

Nozzle Temp195-225°C
Bed Temp50-60°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Spool Size (L×W×H)26 × 7 × 26 cm
Pack FormatKg

What You Receive

Parameters for your quotation: 1.75mm diameter, round cross-section, 1 kg of filament per spool, nozzle range 195-225°C, PLA grade for 3D printing. Every spool is vacuum-sealed with a desiccant sachet inside a printed box, so it arrives dry and stays dry in storage. Need the data sheet and colour card with your quotation? Request a Quote and tell us the colours you are considering.

  • Vacuum-sealed bag
  • Desiccant pack
  • Arrives dry and ready to print

Attributes

Country / Regionchina
HS Code39169050
Item No.matte-pla-colors-no-glare-matte-surface
Material PLA
Applicable Raw Material PLA
Print Precision 0.03mm
Print Size 1.75mm
Application Scenario 3D Printing
Scenario Bridge

Perfect for these projects

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →

Jigs & Fixtures That Survive the Production Floor

View solution →
Before You Ask

Frequently Asked Questions

Why choose matte PLA for prototypes instead of standard glossy PLA?
Because a matte surface photographs and evaluates more honestly. Gloss reflects studio light and hides curvature, parting lines and surface defects, while a matte surface shows form, texture and layer quality as they really are, which matters when a client or an engineer signs off a prototype. The matting agent is compounded into the pellets, so the effect does not wear off with handling, and the finish stays uniform across a printed assembly.
Which printers does this filament work with?
Any FDM printer that runs 1.75mm filament, including Bambu Lab, Creality, Prusa and Anycubic, with direct-drive or Bowden extruders, and no hardened nozzle or enclosure is needed. The 1 kg spool is a standard format that fits common holders and multi-colour units. If you run an unusual machine or a very small nozzle, tell us the setup and we will confirm suitability before you order.
What are the recommended print settings?
Our data sheet lists a nozzle range of 195-225°C for this PLA grade. Prototype jobs usually start around the middle of that range: raise the temperature for faster profiles and lower it for the cleanest surface detail. We do not publish a hot-bed figure for this grade, so begin from the PLA bed setting already in your printer profile. Send us your profile with a photo of the first layers and we will advise on tuning.
How much filament is on one spool?
Each spool holds 1 kg of 1.75mm matte PLA filament on a standard 1 kg spool, vacuum-sealed with a desiccant sachet and boxed. We publish net weight rather than a nominal length, because weight is the figure that lets you plan a job and it matches the unit your slicer uses. For a quoting exercise, send the part list with approximate weight per part and we will calculate the spool count.
What are the typical applications for matte PLA?
Prototypes and client presentations, concept models and architecture studies, jigs and fixtures for light workshop duty, teaching aids and classroom prints, cosplay and prop parts that must not reflect camera light, and retail display pieces. It is also widely used for photographic mock-ups where the surface must not blow out under studio lighting. It is not the grade for high-temperature service; PC, ASA or a technical grade is the better route there.
How is the filament packaged, and how should it be stored?
Each spool is vacuum-sealed in a foil bag with a desiccant sachet and packed in a printed box, so it arrives dry after shipping and stays dry in storage. Keep unopened spools in a cool, dry place away from direct sunlight. After opening, reseal the spool with the desiccant between prints. If a spool has been exposed to humid air for weeks and prints show popping, bubbles or a rough surface, dry it in a filament dryer before use.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Matte PLA Filament 21 Colors 1.75mm 1kg Yiqiu3D

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

→📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→