Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Red
Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Sky Blue
Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Yellow
Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Purple
Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Green
Yiqiu3D, Clear PETG, 1.75 mm, 1 kg, filament spool, retail packaging view PETG Pink

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing

Brand: Yiqiu3D · Model: PETG 1.75mm 1kg · A clear part is only as good as its surface: one bubble, a wet strand or a wandering diameter shows instantly as a cloudy patch or a bright streak inside a transparent cover, and the print is scrap. This PETG grade is extruded to a round 1.75 mm profile and wound tight, and every spool is vacuum-sealed with a desiccant pack, so the melt stays clean and the transparent wall prints even and see-through instead of hazy. Nozzle range 230-260 °C, 1 kg net filament per spool.

  • Published parameters: PETG
  • the strand is wound under tension so diameter and feed stay steady across a full spool. We do not publish a heated bed temperature for this grade.
  • Fits standard 1.75 mm FDM printers and common 1 kg spool holders
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Tolerance ±0.03mm
Material PETG
Quick Answer

What is transparent PETG, and how is it different from a semi-transparent grade?

It is a 1.75 mm PETG that prints into a clear, see-through wall. A transparent grade is formulated for the cleanest possible melt, because any bubble or moisture streak is visible inside the part; a semi-transparent grade deliberately diffuses light instead. We publish no haze or transmission percentage - wall thickness, layer height and infill decide the final look, so test your own geometry first.

Full answers below

Is it right for my project?

Best for: A strong all-rounder for end-use parts needing toughness and easy printing without a heated chamber - available in 9 colours; 1kg spools; lead colour PETG Transparent. Not ideal for: Avoid where very fine cosmetic detail leads; PLA or resin prints cleaner surfaces - available in 9 colours; 1kg spools; lead colour PETG Transparent.

Print settings

Nozzle 230-260°C · Bed 70-80°C

01 · Why this one

Product highlights

3 reasons

Published parameters: PETG, 1.75 mm diameter, nozzle range 230-260 °C, round spool, 1 kg net filament per spool. PETG bonds strongly to itself and needs no heated chamber, which is why it prints tough end-use parts on open-frame machines

the strand is wound under tension so diameter and feed stay steady across a full spool. We do not publish a heated bed temperature for this grade.

Fits standard 1.75 mm FDM printers and common 1 kg spool holders, including Bambu Lab and Creality style machines. Keep the spool in its sealed bag until it goes on the holder: PETG picks up moisture slowly, and in a transparent print that moisture turns into bubbles and haze. Dry an open spool before a critical clear run.

Up Close

Gallery

Product Images

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product ImagesTransparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product ImagesTransparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product ImagesTransparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product ImagesTransparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product ImagesTransparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Product Images

Spec Sheet

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Spec Sheet

Close-up

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Close-up

Scene

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing — Scene
Technical Data

Specifications

Diameter 1.75mm
Tolerance ±0.03mm
Material PETG

Print Profile

Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing prints best at 230-260°C nozzle, 70-80°C bed.

Nozzle Temp230-260°C
Bed Temp70-80°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.29 kg
Spool Size (L×W×H)20.4 × 20.4 × 6.5 cm
Pack FormatSpool

What You Receive

A clear part is only as good as its surface: one bubble, a wet strand or a wandering diameter shows instantly as a cloudy patch or a bright streak inside a transparent cover, and the print is scrap. This PETG grade is extruded to a round 1.75 mm profile and wound tight, and every spool is vacuum-sealed with a desiccant pack, so the melt stays clean and the transparent wall prints even and see-through instead of hazy. Nozzle range 230-260 °C, 1 kg net filament per spool.

  • Vacuum-sealed bag
  • Desiccant pack
  • Arrives dry and ready to print

Attributes

Country / Regionchina
HS Code39169010
Item No.transparent-petg-clear-light-diffusing-led-diffusers
Material 3D Printing Filament
Item No. PETG
PETG Black, 1kg
Scenario Bridge

Perfect for these projects

UV-Stable Filaments Built for 2–5 Year Outdoor Exposure

View solution →

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →
Before You Ask

Frequently Asked Questions

What is transparent PETG, and how is it different from a semi-transparent grade?
It is a 1.75 mm PETG that prints into a clear, see-through wall. A transparent grade is formulated for the cleanest possible melt, because any bubble or moisture streak is visible inside the part; a semi-transparent grade deliberately diffuses light instead. We publish no haze or transmission percentage - wall thickness, layer height and infill decide the final look, so test your own geometry first.
Will this spool fit my printer?
It is a standard round 1.75 mm, 1 kg spool, so it fits common FDM printers and 1 kg spool holders, including Bambu Lab and Creality style machines. If your printer uses a proprietary cartridge or a non-standard hub, send us the model and we will confirm the fit before you order.
What print settings do you recommend?
Nozzle temperature 230-260 °C. We do not publish a heated bed temperature for this grade - start from your printer PETG profile and level the first layer to your build surface. For the clearest wall, stay mid-window, avoid over-heating the melt, print with steady flow and moderate part cooling, and keep the nozzle path consistent so no scratches dull the surface.
How much filament is on one spool?
Each spool carries 1 kg net of 1.75 mm PETG, supplied complete with its spool. We do not publish a metre figure for this SKU, because usable length varies with the diameter and density of the batch. Tell us the part and the layer height you run and we will estimate how many parts one spool covers.
What is this filament best used for?
Clear covers and windows, LED diffusers and light guides, display parts, vases and signage where the see-through look is the point, plus the general PETG job list: brackets, housings and end-use parts that need toughness and easy printing without a heated chamber. Where very fine cosmetic detail leads, PLA or resin gives a cleaner surface.
How is the spool packed and how should I store it?
Every spool is vacuum-sealed with a desiccant pack and boxed for export. Open the bag only when the spool goes on the machine, then reseal it or move it to an airtight container away from sunlight and damp floors. Moisture is visible first in transparent prints, where it shows as bubbles, streaks and haze, so keep spare spools sealed and dry an open spool before a clear run.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Transparent PETG Filament 1.75mm 1kg Clear Light-Diffusing

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

How to Choose Filament for Functional Parts

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Dry PETG Filament (and Why It Matters)

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→