Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Basic White 
PLA Basic Pink 
PL Abasic Black 
PL Abasic Starry Blue 
Silk PLA Gold ![PLA Silk [Warm White]](/images/products/pla-colors-mix-matte-silk-basic/swatch-8.webp)
PLA Silk [Warm White] Brand: Yiqiu3D · Model: 202608150000450 · A set of printed parts is only as good as its worst one: if the second bracket comes off the plate a fraction wider than the first, the assembly will not close and the customer blames the printer rather than the roll. This Basic PLA Filament Beige grade is a low-shrinkage, low-warp formulation built to hold printed dimensions, so repeat parts from the same file fit together and the base stays flat on the plate.
Because the set is assembled after printing, and small size differences stack up. If the second bracket prints a fraction wider than the first, the two will not close, and the customer blames the printer rather than the roll. This grade is a low-shrinkage, low-warp PLA built to hold printed dimensions, so repeat parts from the same file fit together instead of being reworked.
Full answers belowBest for: A low-cost route to jigs and fixtures that see only light duty on the shop floor - available in 9 colours; 1kg spools; lead colour PL Abasic Beige. Not ideal for: Not for heavy-duty tooling; a carbon-fibre or nylon grade performs better under load - available in 9 colours; 1kg spools; lead colour PL Abasic Beige.
Nozzle 190-220°C · Bed 50-60°C
Beige is the lead shade and ships first: a warm neutral that reads as a finished enclosure rather than raw plastic, and it is the tone buyers ask for in architectural, model and home-print lines. The range covers warm neutrals and brights in the same grade, so one slicer profile serves the whole shelf
shade names are confirmed with the supplier per order, so the shade approved in writing is the shade that ships.
1.75mm diameter on a standard round spool, 1 kg net filament per spool, approximately 335 m of strand per spool, and a nozzle window of 190-220 °C. Diameter and the melt window are what decide whether a set of parts repeats on a second run, and both are held to the 1.75mm nominal and the 190-220 °C window spool by spool.
Drop-in on the 1.75mm FDM machines buyers already run - Bambu Lab, Creality, Prusa and similar printers - at ordinary PLA settings, with no enclosure and no hardened nozzle. The round spool fits a standard holder or dry box without an adapter, and the even wind keeps the strand feeding to the end of a set print instead of snagging near the last few metres.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D 1.75mm 1KG PLA Filament 8 Colors Mix Matte Silk Basic Budget Value Pack prints best at 190-220°C nozzle, 50-60°C bed.
| Nozzle Temp | 190-220°C |
|---|---|
| Bed Temp | 50-60°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.18 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Roll |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | pla-colors-mix-matte-silk-basic |
| Material | PLA |
| Suitable for Material | Silk PLA |
| Print Size | 1.75mm |
| Product Weight | 1KG |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
