Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Marble Brick Red Brand: Yiqiu3D · Model: PLAdls0001 · Plain PLA models look plastic and fake? This marble PLA embeds stone-toned particles in the base, so prints carry a real granite or brick texture that hides layer lines and needs no sanding or painting.
Marble PLA blends PLA with fine stone-toned pigments that stay suspended in the melt, so every layer automatically carries the speckled granite or brick look as it is printed — no painting, sanding or coating needed.
Full answers belowBest for: Ideal for models, prototypes and indoor decor where crisp detail and the lowest cost per part matter most - available in 3 colours; 1kg spools; lead colour PLA Marble White. Not ideal for: Not for hot-car interiors or load-bearing parts; use PETG or ABS where heat and impact resistance matter - available in 3 colours; 1kg spools; lead colour PLA Marble White.
Nozzle 190-220°C
Marble Brick Red for warm architectural pieces and Marble Granite for cool sculptural projects — give you natural variation without a speck of post-processing.
Laser-measured 1.75mm diameter and batch-controlled particle dosing keep the speckle pattern uniform across the spool, and every roll is vacuum-sealed with desiccant for dry, consistent extrusion.
no enclosure, no complex profile, just stone-look realism.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D PLA Marble Stone Effect 1.75mm 1kg prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
Laser-measured 1.75mm diameter and batch-controlled particle dosing keep the speckle pattern uniform across the spool, and every roll is vacuum-sealed with desiccant for dry, consistent extrusion.
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | pla-marble-stone-effect-3d-printer-filament-granite-marble |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
