Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLAMacaronGoose Yellow 
PLAMacaronApricot Orange 
PLAMacaronLight Purple 
PLAMacaronPale Purple 
PLAMacaronPeach Pink 
PLAMacaronPale Pink Brand: Yiqiu3D · Stop sanding every print: standard PLA comes off the bed flat and chalky, while this silk-grade filament delivers a jewelry-like metallic sheen straight from the nozzle, so vases, trophies and display pieces look finished — with zero sanding, polishing or coating.
Silk PLA is a PLA blend with special additives that flow into a glossy, reflective surface as the strand cools. The effect happens during printing, which is why silk parts look polished without any post-processing. Gloss depth varies with temperature, so a short temperature tower helps you pick the shine level you like.
Full answers belowBest for: For showpieces and retail displays that photograph well without post-processing - available in 9 colours; lead colour PLAMacaronCream Yellow. Not ideal for: Not for outdoor signage - UV dulls the finish; switch to ASA instead - available in 9 colours; lead colour PLAMacaronCream Yellow.
Nozzle 200-225°C
Dimensional discipline you can rely on: 1.75mm diameter with laser-measured tolerance and clean tangle-free winding keeps extrusion steady through long decorative prints, cutting jams, width jumps and visible layer lines.
No enclosure, no drama: it prints at a standard PLA temperature around 220°C with minimal odour and easy first layers, so Bambu Lab, Creality, Prusa and Anycubic users get glossy results on their first attempt.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Silk PLA 1.75mm prints best at 200-225°C nozzle.
| Nozzle Temp | 200-225°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 5.6 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | silk-pla-3d-printer-filament-jewel-like-glossy-finish |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
