Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PETG Skin Tone 
PETG Orange 
PETG Red 
PETG Peanut Brown 
PETG Green 
PETG Jungle Green Brand: Yiqiu3D · PLA parts crack under load and ABS parts warp off the bed — tired of choosing between them? Leda PETG delivers the toughness of an engineering material with low warp and forgiving printing, so functional parts stay strong and stay flat.
PETG combines PLA's ease of printing with higher strength, toughness, and heat and chemical resistance. It resists cracking under load better than PLA and warps far less than ABS, so functional parts like brackets, enclosures, and storage boxes stay dimensionally accurate.
Full answers belowBest for: A strong all-rounder for end-use parts needing toughness and easy printing without a heated chamber - available in 9 colours; 1kg spools; lead colour PETG White. Not ideal for: Avoid where very fine cosmetic detail leads; PLA or resin prints cleaner surfaces - available in 9 colours; 1kg spools; lead colour PETG White.
Nozzle 230-260°C
from skin, lemon green, jungle green, and lake blue to taro purple, sakura pink, wood, and sky blue — gives your product line the widest variety to please any customer without extra tooling.
Every 1kg spool holds about 330 meters of 1.75mm filament with laser-measured diameter and consistent roundness, wound tangle-free and vacuum-sealed with desiccant so moisture never degrades your prints.
Easy to run: 230-250°C nozzle, 70-80°C bed, no enclosure needed, and reliable on Bambu Lab, Creality, Prusa, and Anycubic machines — a smooth upgrade path for makers moving up from PLA.
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Leda PETG Filament 1.75mm 1kg Tough Low-Warp 23 Colors High-Quality prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.25 kg |
|---|---|
| Length | approx. 325m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
Every 1kg spool holds about 330 meters of 1.75mm filament with laser-measured diameter and consistent roundness, wound tangle-free and vacuum-sealed with desiccant so moisture never degrades your prints.
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | leda-petg-filament-tough-low-warp-23-colors-high-quality-3d |
| Product Name | 3D Printing Consumables/Filament |
| Length | Approx. 330m |
| Specification | 23 colors available (see color chart) |
| Diameter | 1.75mm |
| Length | approx. 325m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
